General Papers
| 2D simulation of tensile behavior of fiber-reinforced brittle matrix composites with weak interface | |
| S. Ochiai, S. Kimura, M. Tanaka, M. Hojo |
| A method for acceleration of decreasing *K FCGR tests | |
| S. Tarafder, S. Sivaprasad, M. Tarafder, K. K. Ray |
| A new experimental technique for determining the fracture energy of wood under mode II loading conditions | |
| K. Fruhmann, E.K. Tschegg, S.E. Stanzl-Tschegg |
| A study of crack depth effect and scattering of fracture toughness in three point bend COD specimens | |
| M. Toyosada, K. Gotoh, S. Nakayama |
| A study of mode II fracture toughness test standardisation of metals | |
| T. Tamilselvan, K. W. Lo, Y. B. Gong, M. O. Lai |
| A theremodynamically consistent damage formulation based on a nonlocal damage activation threshold | |
| G. Borino, E. Benvenuti, A. Tralli |
| Account of plasticity in macro-microcrack interaction | |
| V. Tamuzs, V. Petrova, S. Tarasovs |
| Alternative methods for deriving and fitting J-R curves: How they affect structural integrity assessment | |
| J. R. Tarpani, A. A. Colafemea, W. W Bose Filho, D. Spinelli |
| An analytical technique for studying interacting branched cracks in a plate | |
| S. C. TerMaath |
| Analyses of size effects in the charpy v-notch test | |
| A. A. Benzerga, R. Batisse, A. Needleman, V. Tvergaa |
| Analysis of a penny-shaped crack in a transversely isotropic piezoelectric medium | |
| M.-H. Zhao, P. Tong, T.-Y. Zhang |
| Application of risk-based maintenance with life and financial assessment on fossil-fired power plants | |
| A. Fuji, H. Eguchi, J. Takahashi, C. Fukuoka, T. Tanoue, Y. Okatsuka |
| Automatic control of secondary flexure in uniaxial tensile test of concrete | |
| H. Akita, S. Donggy, H. Koide, M. Tomon |
| Brittle fracture of hard soil - soft rock materials | |
| K. W. Lo, T. Tamilselvan, L. Yu |
| Can stretch zone measurements provide a good estimate of fracture toughness | |
| S. Sivaprasad, S. Tarafder, V. R. Ranganath, S. K. Das, K. K Ray |
| Challenges in characterizing the crack-tip environment as a basis for prediction of crack growth kinetics | |
| A. Turnbull |
| Cohesive and adhesive fracture under nanoscale contacts: Environmental and microstructural effects | |
| N. I. Tymiak, A. Daugela, M. Li, T. J. Wyrobek, W. W. Gerberich |
| Coupling of damage mechanics and probabilistic approach for life-time prediction of composite material structures | |
| Y. Bruner, D. Jeulin, J. Renard, A. Thionnet |
| Creep crack growth analysis based on microscopic fracture mechanism | |
| M. Tabuchi, K. Kubo, K. Yagi, A. T. Yokobori |
| Curved crack path prediction by the MVCCI-method and experimental verification for a specimen under lateral force bending | |
| H. Theilig, F. –G. Buchholz |
| Cyclic plastic deformation of pipeline steel | |
| C. H. L. J. ten Horn, A. Bakker, R. W. J. Koers, J. T. Martin, J. Zuidema |
| Damage evolution and fracture of viscoelastic composites under time-varying loads | |
| J. Varna, A. Krasnikovs, R. Talreja |
| Ductile fracture in high strength steel weldments | |
| V. Olden, Z. Zhang, C. Thaulow |
| Dynamic stress intensity factor for unsteady rapid crack propagation | |
| K. Arakawa, T. Mada, K. Takahashi |
| Effect of fiber coatings on detection of transverse cracks in CFRP composites using FBG sensors | |
| Y. Okabe, N. Tanaka, T. Mitzutani, S. Yashiro, N. Takeda |
| Effect of foreign object damage on the high cycle fatigue strength of Ti-6Al-4V | |
| S. R. Thompson, J. J. Ruschau, T. Nicholas |
| Effect of microstructural change on the R-curve behavior of an alumina matrix composite reinforced with SiC-whiskers | |
| T. Akatsu, Y. Tanabe, E. Yasuda |
| Effects of constraint and grain size on ductility and toughness in Ti Alloys | |
| S. Kanamori, E. Abe, T. Tagawa, T. Miyata |
| Effects of static stress on anodic polarization behavior of Ti-4.5Al-3V-2Mo-2Fe alloy | |
| N. Hyakutake, M. Takagaki, J. Komotori, A. Ogawa, K. Minakawa |
| Effects of T-stress and void nucleation on cohesive zone model predictions for ductile fracture | |
| V. Tvergaard |
| Electromechanical modeling of unidirectional CFRP composites | |
| Y. Okabe, N. Tanaka, T. Mitzutani, S. Yashiro, N. Takeda |
| Electromechanical modeling of unidirectional CFRP composites | |
| T. Okabe, J. B. Park, N. Takeda |
| Environmentally assisted fracture behavior of silicon microelements | |
| K. Komai, K. Minoshima, T. Terada |
| Evaluation of a brittle fracture accidents that occurred at the Hyogo-Ken Nanbu earthquake | |
| M. Toyosada, K. Gotoh, Y. Watanabe, S. Nakayama |
| Evaluation of fracture toughness of ceramics/metal functionally graded material by three-point bending test | |
| K. Tohgo, T. Suzuki, H. Araki, H. Ishii |
| Evaluation of stress intensity factors of spot welded joints using meshless method | |
| K. Shimizu, N. Tomioka, A. Okabe |
| Experimental and analytical studies on peeling behaviour and spalling resistance effect of externally bonded continuous fiber sheets | |
| Z. Wu, T. Asakura, H. Yoshizawa, H. Yuan, A. Kobayashi, T. Takahashi |
| Fatigue and hydrogen cracking in cannons with mechanical and thermal residual stresses | |
| J. H. Underwood, A. P. Parker, E. Troiano, G. N. Vigilante, M. D. Witherell |
| Fatigue behaviour of a micro-sized austenitic stainless steel with fine grains | |
| G. P. Zhang, K. Takashima, M. Shimojo, Y. Higo |
| Fatigue behaviour of multiphase steels for automotive applications | |
| L. Tosal-Martinez, J. Keichel, N. Akdut |
| Fatigue crack growth behaviour of micro-sized specimens prepared from amorphous alloy thin films | |
| K. Takashima, Y. Higo, M. V. Swain |
| Fatigue crack initiation (FCI) life prediction for a flat plate with a central hole | |
| T.-L. Teng, C.-C. Liang, P.-H. Chang |
| Fatigue damage and compressive residual strength of a woven PMC subjected to cyclic hygrothermal conditioning | |
| M. G. Castelli, J. C. Thesken |
| Fatigue life extension of austenitic stainless steel using nano-sized-martensites formed at intersections of dislocations | |
| T. Inamura, M. Shimojo, K. Takashima, Y. Higo |
| Fatigue Prediction of the Life time of screw on a large range of mean stresses | |
| A. Duval, P. Robinet, F. Trivaudey, P. Delobelle |
| Fatigue strength and fracture mechanism of silicon nitrides studied by AE waveform simulation | |
| A. Yonezu, T. Ogawa, M. Takemoto |
| Fracture behaviour of a SiCw/6061Al alloy composite under cyclic loading | |
| L. Wang, T. Kobayashi, Z. M. Sun, H. Toda |
| Fracture behaviour of injection moldings with weld line | |
| H. Hamada, K. Yamada, K. Tomari |
| Fracture initiation and crack growth - cohesive zone modeling and stereoscopic measurements | |
| C. R. Chen, O. Kolednik, F. D. Fischer, I. Scheider, T. Siegmund, A. Tatschl |
| Fracture of verbetral bone gotten surgical screw insertion | |
| T. Tamaki, S. Nguyen, K. Takahashi, M. Yamagata |
| Fracture strength of ceramic nozzle blades under thermal shock conditions | |
| T. Mikami, K. Tagashira, M. Obata |
| Fracture toughness characterization of hydrogen embrittled Cr-Mo steel | |
| Y. Wada, Y. Tanaka |
| Fracture toughness tests for micro-sized specimens | |
| K. Takashima, Y. Ichikawa, Y. Higo, M. V. Swa |
| High resolution analytical characterization of stress corrosion crack tips | |
| S. M. Bruemmer, L. E. Thomas |
| High strain rate deformation behavior of Al-Mg alloys | |
| T. Masuda, T. Kobayashi, H. Toda |
| Hydrogen/length scale interactions during small volume yielding and fracture | |
| W. Gerberich, N. I. Tymiak |
| Image analysis of hydrogen-assisted micro-damage in progressively drawn pearlitic steel | |
| J. Toribio, F. J. Ayaso, E. Ovejero |
| Inelastic cyclic stress-strain response in silicon-nitride ceramics at elevated temperatures | |
| K. Hatanaka, K. Oshita, Y. Ishiga, H. Toyama |
| Inelastic cyclic stress-strain response in silicon-nitride ceramics at elevated temperatures | |
| K. Hatanaka, K. Oshita, Y. Ishiga, H. Toyama |
| Internal damage to wire ropes on crane: Case studies of fracture accidents and countermeasures for prevention | |
| M. Tanaka |
| Loading rate dependence of mode I fracture behavior of rubber toughened PMMA | |
| M. Todo, K. Takahasi |
| Long term prediction of fatigue life for FRP joint systems | |
| Y. Miyano, M. Nakada, N. Sekine, S. W. Tsai |
| Mechanical and fracture properties of methacrylic particle-modified PVC | |
| Y. Nakamura, E. Takekuni, Y. Kinugawa, T. Iida |
| Mechanical behavior and electrical resistance change in carbon particle dispersed plastic composite | |
| D.-Y. Song, Y. Hirata, N. Takeda |
| Mechanisms of fracture in pearlitic steels with different degrees of cold drawing | |
| J. Toribio, F. J. Ayaso, M. Toledano |
| Mechnical behaviour and electrical resistance change in carbon particle dispersed plastic composite | |
| D.-Y. Song, Y. Hirata, N. Takeda |
| Modeling of crack-opening stress levels under different service loading spectra and stress levels for a 1045 annealed steel | |
| M. Khalil, T. H. Topper, K. Soudki |
| Molecular dynamics simulation of crack propagation in HCP crystals | |
| S. Ando, K. Takashima, H. Tonda |
| Monitoring part-through crack growth using the compliance technique | |
| N. Parida, S. Tarfder |
| Multipass welding simulation of tig welded AISI 316LN | |
| C. H. L. J. ten Horn, G. W. Medendorp, J. Zuidema, A. Bakker, P. G. de Heij, D. d'Hulst |
| Non-contact detection of delamination in impacted cross-ply CFRP using laser generated lamb waves | |
| Y. Mizutani, H. Nishino, M. Takemoto, K. Ono |
| Nonlinear fracture mechanics of delamination failure in a composite strengthened concrete beam | |
| C. K. Y. Leung, M. Klenke, W. K. Tung, H. C. Y. Luk |
| Notch effect of micro polycrystalline silicon cantilever | |
| S. Hamada, S. Tani, M. Horikawa, H. Otani, M. Tsugai, E. Yosikawa |
| Observation of fatigue crack initiation and early propagation in ultrafine-grained steel by atomic force microscopy | |
| H. Kimura, Y. Akiniwa, K. Tanaka, J. Kondo, T. Ishikawa |
| Offset method for determination of lower-bound fracture toughness in the transition temperature region | |
| T. Iwadate, H. Takemata |
| On fatigue limit of notched components | |
| M. D. Chapetti, T. Tagawa, T. Miyata |
| Optimization of delamination fracture toughness using design of experiments and genetic algorithms | |
| A. Pelegri, A. Tekkam |
| Plastic behaviour of nano-scale silicon structure at intermediate temperatures | |
| Y. Isono, T. Namazu, T. Tanaka |
| Predicting the fatigue-life of structural adhesive joints | |
| A. J. Kinloch, A. J. Curley, H. Hadavinia, A. C. Taylor |
| Qualification of cleavage fracture toughness on the basis of local fracture criterion approach | |
| T. Miyata, T. Tagawa, C. E. Chaves |
| Qualification of cleavage fracture toughness on the basis of local fracture criterion approach | |
| T. Miyata, T. Tagawa, C. Chaves |
| Rubber-particle-size dependent strain rate effects on mechanical properties and de formation behaviour of high-impact polystyrene | |
| T. Kuboki, K. Takahashi, P. Y. Ben Jar, T. Shinmu |
| Simulation of propagation of small fatigue cracks interacting with grain boundary | |
| A. Akiniwa, K. Tanaka, H. Kimura |
| Size effect of corrosion fatigue properties in micro-sized 304 austenitic stainless steel specimens | |
| Y. Mizutani, M. Shimojo, K. Takashima, Y. Higo |
| SQUID damage monitoring for austenitic stainless steel | |
| T. Suzuki, K. Hirano, T. Terawoto |
| Strength properties in substrate for semiconductor electronic devices by thermal cyclic test | |
| N. Okabe, M. Tsutsumi, X. Zhu, Y. Abe |
| Stress corrosion cracking mechanism on the basis of the interaction model of dislocation and hydrogen around a crack tip | |
| A. T. Yokobori, J. C. Ha, T. Shoji, S. Taketomi, G. F. Li |
| Studies on deformation and fracture behaviour of welded plate for a super steel | |
| F. Tian, Y. Shi |
| Suppression of transverse cracks in CFRP laminates with embedded SMA foils | |
| N. Takeda, M. Kobayashi, T. Okabe |
| Surface and interface characterization of ferritic stainless steel by 57Fe CEMS | |
| K. Nomura, T. Terai, T. Sawada |
| Temperature dependence of damage behavior in a silicon nitride for gas turbine by spherical particles | |
| Y. Akimune, N. Tooyama, T. Akiba, F. Munakata |
| Temperature dependence of fracture toughness in a micro-sized Ni-P amorphous alloy | |
| R. Tarumi, M. Shimojo, K. Takashima, Y. Higo |
| Tensile and low cycle fatigue standard testing for solders - JSMS recommendation | |
| M. Sakane, H. Nose, M. Kitano, H. Takahashi, M. Mukai, Y. Tsuka |
| The anti-plane shear field for crack in infinite slab of a nonlinear damage material | |
| L. Tang |
| The effect of processing on tensile strength and fracture behavior of CFRP smart composites with embedded shape memory alloy wires | |
| B. K. Jang, J.-H. Koo, Y. Xu, N. Toyama, H. Yoshida, Y. Akimune |
| The fracture of geopolymers | |
| J. F. Silva, C. Thaumaturgo |
| The influence of thermal residual stresses and friction on fatigue crack growth in fibre-reinforced intermetallic matrix composites | |
| G. Rauchs, P. J. Withers, P.F. Thomason |
| The role of particles in fatigue crack propagation of aluminium alloys | |
| Z. Z. Chen, K. Tokai, T. Horimoto |
| The simulations of the void initiation from the multiple seeds by molecular dynamics and the FEM | |
| T. Tsuji, N. Noda |
| Three-dimensional mixed mode fracture on cement mortar | |
| K. Zhong, K. W. Lo, T. Tamilselvan |
| Time dependent stress intensity factors in a viscoelastic strip | |
| M. Takashi, S. Yoneyama |
| Transition from ductile to cleavage fracture - effect of specimen size and mismatch | |
| E. Ostby, Z. L. Zhang, C. Thaulow |
| Vibrodiagnostics of Fatigue Cracks in Cylinder Shells | |
| A.B. Roytman, O.A. Titova |