General Papers
| 2D and 3D self-affine crack propagation on aluminium alloys | |
| M. Hinojosa, E. I. Morales, X. Guerrero, U. Ortiz, J. Aldaco |
| A J estimation scheme and its application to low cycle fatigue crack growth | |
| G. G. Chell, R. C. McClung, Y.-D. Lee |
| A numerical study of constraint and rate effects on dynamic crack growth | |
| X. Zhang, Y.-W. Mai |
| A potential node release technique for estimating ductile crack growth in metallic materials | |
| J. X. Zhang, H. Murakawa |
| A toughness study of the weld heat affected zone of a modified 9Cr-1Mo steel | |
| A. Moitra, K. Laha, R. P. Sreenivasan, S. L. Mannan |
| Accuracy of measurement in instrumented impact test | |
| T. Kobayashi, S. Morita |
| Aircraft structural integrity: the impact of corrosion | |
| G. Clark, P. K. Sharp, T. Mills |
| An elasto-plastic damage model for cementitious materials | |
| D. Addessi, S. Marfia, E. Sacco |
| Analysis and testing of rupture of steam generator tubing with flaws | |
| S. Majumdar, K. S. Kasza, J. Y. Park, J. Abou Hanna |
| Analysis of micromechanical tensile damage process for brittle ceramic materials using FEM | |
| T. Niezgoda, J. Malachowski, Z. Smalko |
| Assessment of fatigue strength of low alloy steels for ships' crankshaft | |
| S. Omata, H. Matsushita |
| Atomistic approaches to fracture | |
| M. Marder |
| Atomistic simulations of the mechanical response and modes of failure in metals at finite strain | |
| J. Zhao, S. Chantasiriwan, D. Maroudas, F. Milstein |
| Beam theory and weight function methods for mode I delamination with large scale bridging | |
| R. Massabo, B. N. Cox |
| Computational modelling of residual stress effects on crack initiation and growth in ductile materials | |
| N. P. O'Dowd, Y. Lei, P. S. May, G. A. Webster |
| Constituent effects on the stress-strain behavior of woven melt-infiltrated SiC composites | |
| G. N. Morscher, J. I. Eldridge |
| Constraint correction of fracture toughness CTOD for fracture performance evaluation of structural components | |
| F. Minami, K. Arimochi |
| Construction of strain-life diagram based on variable amplitude fatigue data | |
| M. Endo, H. Miyata |
| Continuum-atomistic modeling for crack initiation and propagation in polycrystals | |
| E. Iesulauro, K. Dodhia, T. Cretegny, C.-S. Chen, C. Myers, A. R. Ingraffea |
| Corrosion cracking of stainless steel under stress: the problem and its solution | |
| A. A. Myatie-v, G. V. Khil'chenko |
| Corrosion fatigue fracture behavior of high-strength Cu trolley wire for high-speed railroad services | |
| K. Minoshima, K. Miyazawa, K. Komai |
| Corrosion fatigue mechanisms in metallic materials | |
| T. Magnin, D. Delafosse |
| Corrosion-fatigue performance of die cast magnesium alloys | |
| W. G. Ferguson, W. Liu, J. MacCulloch |
| Crack Plane Influence on Time-Dependent Fracture of Bimaterials | |
| A. Gordon, D. McDowell |
| Cross-sectional nanoindentation: a new technique to measure thin film interfacial adhesion | |
| B. Sun, T. Scherban, D. Pantuso, J. M. Sanchez, R. Elizalde, J. M. Martinez-Esnaola |
| Cyclic plastic deformation of pipeline steel | |
| C. H. L. J. ten Horn, A. Bakker, R. W. J. Koers, J. T. Martin, J. Zuidema |
| Deterioration properties of damaged concrete due to freezing and thawing | |
| H. Mihashi, M. Saichi |
| Determination of fracture properties of high-chromium white cast iron | |
| M. Janssen, M.B. van Leeuwen, M.F. Mendes de Leon |
| Determining load history effects on HCF crack growth thresholds | |
| M. A. Moshier, T. Nicholas, B. M. Hillbery |
| Direct comparison of elastic-perfectly-plastic interfacial free-edge and crack-tip singular fields | |
| L. Marsavina, A. D. Nurse |
| Discontinous crack growth of polymide resin, effect of molecular weight | |
| M. Notomi, K. Kishimoto, T. Shibuya, H. Inaba, A. Morita |
| Dynamic delaminatin in through-thickness reinforced DCB specimens | |
| N. Sridhar, B. N. Cox, I. J. Beyerlein, R. Masa |
| Dynamic embrittlement: time dependent intergranular decohesion | |
| C. McMahon |
| Dynamic JR curves from instrumented impact test of unprecracked charpy V-notch specimens of austenitic stainless steel | |
| P. R. Sreenivasan, S. K. Ray, S. L. Mannan |
| Dynamic stress intensity factor for unsteady rapid crack propagation | |
| K. Arakawa, T. Mada, K. Takahashi |
| Dynamic tensile strength of PMMA/AL plate butt adhesive joints | |
| H. Wada, S. Kubo, K. Murase, T. C. Kennedy |
| Dynamics of inter-facial crack front propagation | |
| K. J. Maloy, J. Schmittbuhl, A. Delaplace, J. J. Ramasco |
| Effect of fiber coatings on detection of transverse cracks in CFRP composites using FBG sensors | |
| Y. Okabe, N. Tanaka, T. Mitzutani, S. Yashiro, N. Takeda |
| Effect of film plasticizing under multistage ultimate strain | |
| A. A. Myatie-v, G. V. Khil'chenko |
| Effect of halogen freeing on fatigue properties of electronics printed plastic board | |
| M. Nakamura, H. Suzuki, T. Matsumoto, T. Ohtsuki |
| Effect of reinforcing particle morphology on the tensile response of 6061/SiC/25p discontinuously-reinforced aluminum | |
| J. E. Spowart, D. B. Miracle |
| Effect of surface crack geometry on the fatigue life of a high strength low alloy steel | |
| A. Giassone, F. A. Darwish, M. V. Pereira, .A C. Vidal, A. R. Martins |
| Effect of the notch shape and the presence of a circular void in front of a circular notch on the failure mode transition speed in an impact loaded plate | |
| R. C. Batra, N. A. Jaber, M. E. Malsbury |
| Effect of the size of surface defects on the fatigue strength of shot peened springs | |
| B. Vargas-Arista, J. L. Gonzalez, J. M. Hallen, A. J. McEvily |
| Effects of constraint and grain size on ductility and toughness in Ti Alloys | |
| S. Kanamori, E. Abe, T. Tagawa, T. Miyata |
| Effects of heterogeneity on the strength of 3D composites | |
| S. Mahesh, S. Leigh Phoenix, I. J. Beyerlien |
| Effects of static stress on anodic polarization behavior of Ti-4.5Al-3V-2Mo-2Fe alloy | |
| N. Hyakutake, M. Takagaki, J. Komotori, A. Ogawa, K. Minakawa |
| Electromechanical modeling of unidirectional CFRP composites | |
| Y. Okabe, N. Tanaka, T. Mitzutani, S. Yashiro, N. Takeda |
| Energy balance method for predicting cracking in cross-ply laminates during bend deformation | |
| N. McCartney |
| Environmentally assisted fracture behavior of silicon microelements | |
| K. Komai, K. Minoshima, T. Terada |
| Estimation of high cycle fatigue limit of hard shot peened austenitic stainless steel | |
| K. Masaki, Y. Ochi, T. Matsumura |
| Evaluation of high-cycle fatigue life of aluminum cast alloy from meso-level consideration | |
| H. Noguchi, T. Miyazaki |
| Experimental failure modes and finite element analysis of lightweight ceramic ablator materials under iosipescu shear testing | |
| S. Nagasawa, K. E. Parmenter, K. Shuman, F. Milstein |
| Experimental study on effect which mechanical properties of beam materials on deformation capacity of beam/column connections | |
| T. Nakagomi, K. Matoba, Y. Ichikawa |
| Experimental-numerical analysis of mechanisms of damage initiation in tool steels | |
| L. Mishnaevsky Jr, N. Lippmann, S. Schmauder |
| Failure analysis of a particulate composite cutoff wheel with fiber reinforcing | |
| T. J. Mackin, H. Inglis |
| Failure analysis of the girth gear of an industrial ball mill | |
| M. Mirzaei, A. Razmjoo, A. Pourkamali |
| Fatigue and fracture of Cu-SiO2 alloys at elevated temperatures | |
| H. Miura, T. Sakai |
| Fatigue behaviour of a pultruded glass-reinforced polymer-matrix composite material | |
| L. B. Godefroid, W. A. Morais, G. P. Silva, J. A. Martins |
| Fatigue crack growth acceleration effects under helicopter loading spectra | |
| V. Zitounis, P. E. Irving, D. Matthew, R. Cook, S. Jenkins |
| Fatigue crack initiation and propagation from reinforcement fiber ends for Ti-alloy matrix composites | |
| K. Hirano, S. Miyake, H. Yoshida |
| Fatigue crack propagation of dissimilar metal welds | |
| C. S. Kusko, J. N. DuPont, A. R. Marder, S. Spooner |
| Fatigue damage in advanced polymer matrix composites | |
| H. E. Carroll, T. J. Mathams, D. M. Knowles, A. J. Davies |
| Fatigue fracture plane direction assessment through the weight function method | |
| A. Carpinteri, A. Karolczuk, E. Macha |
| Fatigue-creep interactions in solder alloys | |
| J. E. Moffatt, W. J. Plumbridge |
| Foreign object damage and high-cycle fatigue thresholds in Ti-6-6Al-4V | |
| J. O. Peters, B. L. Boyce, J. M. McNaney, R. O. Ritchie |
| Fractographic analysis of fish-eye type fatigue crack in two high strength steels | |
| K. Mori, A. Uchiyama, Y. Yamada |
| Fracture behaviour of a fibre-bridged crack | |
| X. Zhang, H.-Y. Liu, Y.-W. Mai |
| Fracture behaviour of blends consisting of asymmetric styrene/butadiene block copolymers | |
| R. Adhikari, R. Lach, G. H. Michler, R. Weidisch, W. Grellmann |
| Fracture mechanics characterisation of epoxy resins by means of mini-compact-tension-specimens | |
| C. Bierogel, H. Walter, W. Grellmann, H. Henning, B. Michel |
| Fracture strength degradation of Si-based ceramics by molten salt corrosion | |
| N. Masuda, Y. Kimura |
| Fracture strength of ceramic nozzle blades under thermal shock conditions | |
| T. Mikami, K. Tagashira, M. Obata |
| Fracture toughness and fracture processes in ductile metallic foams | |
| C. Motz, R. Pippan |
| Fracture toughness measurement of small cracks in high strength steel wire | |
| B. Bromage, T. J. Marrow |
| Grain size effect on fatigue crack initiation condition observed by using atomic-force microscopy | |
| Y. Nakai, K. Maeda |
| High strain rate behaviour of high strength steels for automotive applications | |
| O. Moriau, P. Verleysen, J. Degrieck, N. Akdut |
| High strain rate deformation behavior of Al-Mg alloys | |
| T. Masuda, T. Kobayashi, H. Toda |
| Impact strength of cracked structural member | |
| I. Maekawa, K. Uda |
| Influence of residual stress on super-long life fatigue properties of high strength steel SNCM439 | |
| T. Matsumura, Y. Ochi, S. Yoshida, K. Masaki |
| Interfacial adhesion and crack initiation at metal/ceramic interface | |
| S. X. Mao, M. Z. Li |
| Issues in fracture toughness and r-curve behavior of particle reinforced metal matrix composites | |
| B. S. Majumdar |
| Long term prediction of fatigue life for FRP joint systems | |
| Y. Miyano, M. Nakada, N. Sekine, S. W. Tsai |
| Mathematical model of a crack on an imperfect interface | |
| Y. A. Antipov, A. B. Movchan |
| Mechanical properties of ionomer/clay nonocomposite-modified epoxy | |
| S. Matsuda, H. Akimoto, A. Murakami |
| Micromechanical modeling of hydrogen-induced fracture modes in IN903 | |
| B. P. Somerday, N. R. Moody |
| Modeling the effects of residual stresses on cleavage fracture in welded steel frames | |
| C. G. Matos, R. H. Dodds |
| Modelling crack propagation: a phase field approach | |
| L. O. Eastgate, J. P. Sethna, M. Rauscher, C. R. Myers, C. S. Chen |
| Modelling of damage evolution equation of PZT ceramics and its application to crack growth analysis | |
| M. Mizuno, Y. Honda, H. Kato |
| Multipass welding simulation of tig welded AISI 316LN | |
| C. H. L. J. ten Horn, G. W. Medendorp, J. Zuidema, A. Bakker, P. G. de Heij, D. d'Hulst |
| Multi-scale fatigue of As-cast lightweight structural metals | |
| K. Gall, M. Horstemeyer, D. L. McDowell, J. Fan, N. Yang |
| Non-contact detection of delamination in impacted cross-ply CFRP using laser generated lamb waves | |
| Y. Mizutani, H. Nishino, M. Takemoto, K. Ono |
| Numerical modelling of ceramic materials microstructures for residual stresses concentrations | |
| T. Niezgoda, W. Szymczyk, J. Malachowski, M. Woropay |
| Numerical simulation of concrete failure in pull-out experiments | |
| P. Pivonka, R. Lackner, H. A. Mang |
| On fatigue limit of notched components | |
| M. D. Chapetti, T. Tagawa, T. Miyata |
| On the applicability of the essential work of fracture method to thick abs Se(b)-specimens | |
| P. Luna, E. Lievana, C. Bernal, P. Frontini, Y.-W. Mai |
| On the essential work of fracture: Application to characterise thin polymer films fracture | |
| L. Cousin-Cornet, M. Nait Abdelaziz, C. C. Cazeneuve, G. Mesmacque |
| Optimization of a dynamic fracture process with 1D model | |
| H. Maigre |
| Optimizing cement-based coatings with respect to shrinkage crack formation | |
| G. Martinola |
| Oxygen enhanced crack growth in nickel-base superalloys under sustained and fatigue loading | |
| R. Wei, Z.-F. Huang, C. Miller, G. W. Simmon |
| Plastic-damage model for stress-strain behaviour of soils | |
| N. Al-Shayea, K. Mohib, M. Baluch |
| Qualification of cleavage fracture toughness on the basis of local fracture criterion approach | |
| T. Miyata, T. Tagawa, C. E. Chaves |
| Qualification of cleavage fracture toughness on the basis of local fracture criterion approach | |
| T. Miyata, T. Tagawa, C. Chaves |
| Reconstruction of fracture process of spheroidal graphite cast iron by analyzing the confocal scanning laser microscope images | |
| Y. Mori, Y. Obata, P. Kriengsak, T. Umeda, S. Nose |
| Revisited energy criteria for interface crack deflection | |
| D. Leguillon, C. Lacroix, E. Martin |
| Roughness Waves as Detected on Glassy Materials by DCdc experiments in the Low Speed Regime: The Role of Microstructure | |
| C. Marliere, F. Despetis, J. Phalippou |
| Scaling of quasi-brittle fracture: morphology of crack surfaces and asymptotic analysis | |
| S. Morel, E. Bouchaud, G. Valentin |
| Simulation of damage mechanisms in high speed grinding of structural ceramics | |
| P. Geubelle, S. Maiti |
| Size effect of corrosion fatigue properties in micro-sized 304 austenitic stainless steel specimens | |
| Y. Mizutani, M. Shimojo, K. Takashima, Y. Higo |
| Slow brittle fracture | |
| C.J. McMahon Jr. |
| Software methodologies for multiscale descriptions of defects, deformation and fracture | |
| C. Myers, C.-S. Chen, T. Cretegny, N. P. Bailey, A. J. Dolgert, L. O. Eastgate |
| Spalling of railway tunnel concrete and its causes | |
| T. Asakura, K. Mizuno, K. Yashiro, T. Muguruma, Y. Matsuda |
| Stress analysis and life assessment of a gas turbine blade | |
| M. Mirzaei, R. Karimi |
| Stress analysis near crack tip in mixed-mode condition by speckle photography | |
| K. Machida, K. Ushi, H. Okamura |
| Stress intensity factor error index for finite element analysis with singular elements | |
| T. Meshii, K. Watanabe |
| Study of effects of Notch-Tip and crack-tip Plasticity on Short Fatigue Crack Growth | |
| W. Li, X. Zhang, Y.-W. Mai, L. Ye |
| Subcase crack propagation threshold and microhardness profile influence in rolling contact fatigue of carburised components | |
| G. Donzella, A. Mazzu, L. Solazzi |
| Temperature dependence of damage behavior in a silicon nitride for gas turbine by spherical particles | |
| Y. Akimune, N. Tooyama, T. Akiba, F. Munakata |
| Tensile and low cycle fatigue standard testing for solders - JSMS recommendation | |
| M. Sakane, H. Nose, M. Kitano, H. Takahashi, M. Mukai, Y. Tsuka |
| The dynamic punch test in isotropic and composite materials | |
| C. Rubio-Gonzalez, J. J. Mason |
| The effect of cold expansion on fatigue resistance on fastener holes | |
| J. Vogwell, J. M. Minguez |
| The effect of thickness on the characterisation of crack tip opening angle for 2024-T351 aluminium alloy | |
| S. Mahmoud, K. Lease |
| The effects of diffusion on interfacial fracture of multilayer hybrid microcircuit films | |
| N. R. Moody, D. P. Adams, D. Medlin, A. Volinsky, N. Yang, W. W. Gerberich |
| The fracture toughness properties of large upset resistance stainless steel welds | |
| M. J. Morgan, S. L. West, W. R. Kanne Jr, G. K. Chapman |
| The influence of the in-plane constraint on the J resistance curves | |
| A. Neimitz, J. Galkiewicz, R. Molasy |
| The role of monazite in oxide ceramic matrix composites | |
| J. Davis, D. B. Marshall, P. E. D. Morgan |