General Papers
| A stiffness release (finite element) model for high speed crack propagation analysis | |
| N. N. Kishore, M. Siva Reddy, G. V. Deskmukh |
| A strain based approach to assessing creep crack initiation and crack growth | |
| D. J. Smith, A. J. Fookes, D. W. Dean |
| An impact damage model for cementitious composites | |
| P. Verleysen, J. Degriek |
| Analysis of ballistic properties of multilayered shields using approximate models | |
| T. Elperin, G. Ben-Dor, A. Dubinsky |
| Application of ultrasonic peening to improving fatigue properties of welded joints | |
| H. Lixing, W. Dongpo, S. Yufeng, C. Jungmei |
| Automatic control of secondary flexure in uniaxial tensile test of concrete | |
| H. Akita, S. Donggy, H. Koide, M. Tomon |
| Betonite pellets mechanical properties variation caused by oily waste inclusion | |
| E. A. de Carvalho, G. P. Sousa, J. N. F. Holanda |
| Can stretch zone measurements provide a good estimate of fracture toughness | |
| S. Sivaprasad, S. Tarafder, V. R. Ranganath, S. K. Das, K. K Ray |
| Cohesive and adhesive fracture under nanoscale contacts: Environmental and microstructural effects | |
| N. I. Tymiak, A. Daugela, M. Li, T. J. Wyrobek, W. W. Gerberich |
| Comparison of experiment and theory for crack tip fields in ductile single crystals | |
| W. C. Crone, W. J. Drugan |
| Computational modelling of cracks in viscoplastic media | |
| G. N. Wells, L. J. Sluys, R. de Borst |
| Continuum-atomistic modeling for crack initiation and propagation in polycrystals | |
| E. Iesulauro, K. Dodhia, T. Cretegny, C.-S. Chen, C. Myers, A. R. Ingraffea |
| Corrosion fatigue mechanisms in metallic materials | |
| T. Magnin, D. Delafosse |
| Crystallographic analysis of surfaces after brittle fracture in ferritic steels | |
| V. Randle, P. Davies, O. Williams |
| Discrete dislocation analyses of crack growth | |
| V. S. Deshpande, A. Needleman, E. Van der Giessen |
| Dynamic compressive behavior of closed-cell aluminum foams | |
| J. Lankford, A. Nicholls, K. Dannemann |
| Dynamics of inter-facial crack front propagation | |
| K. J. Maloy, J. Schmittbuhl, A. Delaplace, J. J. Ramasco |
| Effect of bridging ligaments upon crack kinking in graded interfaces | |
| M. Hoffman, L. Kidson, C. Deneke |
| Effect of impact loading on tensile strength of concretes | |
| M. Daimaruya, H. Kobayashi, H. Shizawa, R. A. Siriegar, Y. Ishihata |
| Effect of microstructural degradation on crack tip stress fields in two-phase single crystals | |
| E. P. Busso, N. P. O'Dowd, S. Dumoulin, D. Allen |
| Effect of nanotexturing on interfacial adhesion in MEMS | |
| M. P. de Boer |
| Effect of surface crack geometry on the fatigue life of a high strength low alloy steel | |
| A. Giassone, F. A. Darwish, M. V. Pereira, .A C. Vidal, A. R. Martins |
| Elevated temperature fracture and crack growth in TiAl base intermetallics | |
| B. Dogan |
| Fatigue crack propagation of dissimilar metal welds | |
| C. S. Kusko, J. N. DuPont, A. R. Marder, S. Spooner |
| Fatigue damage and repair of 250 kN portal crane in shipyard | |
| Z. Domazet, Z. ozina, T. Pirsic |
| Fatigue damage in advanced polymer matrix composites | |
| H. E. Carroll, T. J. Mathams, D. M. Knowles, A. J. Davies |
| Fatigue Prediction of the Life time of screw on a large range of mean stresses | |
| A. Duval, P. Robinet, F. Trivaudey, P. Delobelle |
| Fractal fracture surfaces and fluid displacement process in fractured rocks | |
| T. Babadagli, K. Develi |
| Fracture and multi-scale simulations of thin films structures | |
| R. H. Dauskardt |
| Fracture mechanisms for SiC fibers and SiC/SiC composites under stress-rupture conditions at high temperatures | |
| J. A. Di Carlo, H. M. Yun, J. B. Hurst |
| High strain rate behaviour of high strength steels for automotive applications | |
| O. Moriau, P. Verleysen, J. Degrieck, N. Akdut |
| Impact welding of aluminium tube to a stainless steel target - effect of deformation of tube on bonding condition | |
| H. Date |
| Influence of annealing process on ultrafast carrier dynamics for an ion-implanted silicon surface | |
| H. Donen, Y. Inagaki, K. Katayama, M. Fujinami, T. Sawada |
| K-R curves of thin 2195-T8 aluminium alloy plate | |
| R. Doglione, D. Firrao |
| Mechanics-based modeling of dynamic fragmentation and comparison with experiments | |
| W. J. Drugan |
| Modeling the effects of residual stresses on cleavage fracture in welded steel frames | |
| C. G. Matos, R. H. Dodds |
| Modelling of plastic effects during small fatigue-crack growth | |
| O. Y. Andreykiv, V. V. Panasyuk, R. O. Ritchie, O. I. Darchuk |
| Modelling of size effects on fracture in the brittle-to-ductile transition regime | |
| A. H. Sherry, D. P. Lidbury, D. C. Connors, A. R. Dowling |
| Multipass welding simulation of tig welded AISI 316LN | |
| C. H. L. J. ten Horn, G. W. Medendorp, J. Zuidema, A. Bakker, P. G. de Heij, D. d'Hulst |
| Nano-indentation fracture with a corner cube indenter | |
| J. S. Field, R. Dukino, N. Iwashita, M. V. Swain |
| Numerical, experimental, nondestructive, and image analyses of damage; progression in cast A356 aluminium notch tensile bars | |
| M. F. Horstemeyer, K. Gall, K. W. olan, A. aters, A. M. Gokhale, M. D. Dighe |
| On the detection of fatigue damage prior to surface indication | |
| G. Wheatley, D. Barton, K. Davey |
| Plane stress and strain in side-grooved CCT-specimens | |
| C. van Kranenburg, T. Riemslag, S. de Vries, J. Zuidema, F. Veer |
| Prediction of fracture initiation at three-dimensional bimaterial interface corners: Application to butt-joints loaded in bending | |
| P. E. W. Labossiere, M. L. Dunn |
| Predictive model for the steady-state failure of adhesively-bonded joints with extensive plastic yielding | |
| T. Ferracin, T. Pardoen, F. Delannay, C. M. Landis, J. Y. Sener |
| Propagation of a fluid-driven penny-shaped fracture parallel to the free-surface of an elastic solid | |
| X. Zhang, R. Jeffrey, E. Detournay |
| Recent developments in the Weibull Stress Model for prediction of cleavage fracture in ferritic steels | |
| X. Gao, R. Dodds |
| Residual stress effects on fatigue crack propagation in friction stir welds | |
| C. Dalle Donne, G. Raimbeaux |
| Reverse bulging and plugging in metal foil induced by high power laser | |
| Y. C. Zhou, Z. P. Duan |
| Roughness Waves as Detected on Glassy Materials by DCdc experiments in the Low Speed Regime: The Role of Microstructure | |
| C. Marliere, F. Despetis, J. Phalippou |
| Short fatigue crack growth under multiaxial nonproportional loading | |
| J. Hoffmeyer, R. Doring, T. Seeger, M. Vormwald |
| Software methodologies for multiscale descriptions of defects, deformation and fracture | |
| C. Myers, C.-S. Chen, T. Cretegny, N. P. Bailey, A. J. Dolgert, L. O. Eastgate |
| Some aspects of fatigue crack propagation after overloading cycles | |
| M. Da Silva Ramos, M. Venicius Soares Pereira, M. Venicius Soares Pereira |
| Static and dynamic fracture properties of high strength steel chain materials | |
| D. M. Shuter, J. T. Dutton, W. Geary |
| Strength evaluation of the ECCS-GDH piping connection and determination of the critical crack under waterhammer event | |
| G. Dundulis, E. Uspuras |
| Subcase crack propagation threshold and microhardness profile influence in rolling contact fatigue of carburised components | |
| G. Donzella, A. Mazzu, L. Solazzi |
| Tensile fracture and creep-rupture behaviour of SiC Fibers | |
| H. M. Yun, J. A. Di Carlo |
| The effect of thickness and crack geometry on material fracture toughness of high-toughness pipeline steels | |
| H. Dong, W. Guo |
| The influence of dynamic testing on the J - R resistance curve behavior of medium density polyethylene | |
| J. T. Dutton, D. M. Shuter, W. Geary |
| The mechanical behaviour and fracture of thin wall iron under quasi-static and dynamic loading conditions | |
| K. K. Schrems, J. A. Hawk, O. N. Dogan |
| The role of monazite in oxide ceramic matrix composites | |
| J. Davis, D. B. Marshall, P. E. D. Morgan |
| Thermal failure mechanism and threshold of SiC particula reinforced metal matrix composites | |
| Y. C. Zhou, S. G. Long, Z. P. Duan |
| Toughening of nano-composite ceramics | |
| D.-N. Fang, X. Dong, A. Soh |
| Ultimate analysis of ignalina NPP reinforced concrete containment subjected to internal pressure | |
| G. Dundulis, E. Uspuras |