Issue 51

A. Chiozzi et alii, Frattura ed Integrità Strutturale, 51 (2020) 9-23; DOI: 10.3221/IGF-ESIS.51.02 23 Genetic Algorithm NURBS-based Formulation, J. Eng. Mech., 143(9), DOI: 10.1061/(ASCE)EM.1943-7889.0001267. [29] Chiozzi, A., Milani, G., Tralli, A. (2017). Fast kinematic limit analysis of FRP-reinforced masonry vaults. II: Numerical simulations, J. Eng. Mech., 143(9), DOI: 10.1061/(ASCE)EM.1943-7889.0001268. [30] Chiozzi, A., Grillanda, N., Milani, G., Tralli, A. (2018). UB-ALMANAC: An adaptive limit analysis NURBS-based program for the automatic assessment of partial failure mechanisms in masonry churches, Eng. Fail. Anal., 85, pp. 201– 220, DOI: 10.1016/j.engfailanal.2017.11.013. [31] Chiozzi, A., Milani, G., Grillanda, N., Tralli, A. (2016). An Adaptive Procedure for the Limit Analysis of FRP Reinforced Masonry Vaults and Applications, Am. J. Eng. Appl. Sci., 9(3), pp. 735–745, DOI: 10.3844/ajeassp.2016.735.745. [32] Chiozzi, A., Malagù, M., Tralli, A., Cazzani, A. (2016). ArchNURBS: NURBS-Based Tool for the Structural Safety Assessment of Masonry Arches in MATLAB, J. Comput. Civ. Eng., 30(2), DOI: 10.1061/(ASCE)CP.1943-5487.0000481. [33] Grillanda, N., Chiozzi, A., Bondi, F., Tralli, A., Manconi, F., Stochino, F., Cazzani, A. (2019). Numerical insights on the structural assessment of historical masonry stellar vaults: the case of Santa Maria del Monte in Cagliari, Contin. Mech. Thermodyn., in press, pp. 1–24, DOI: 10.1007/s00161-019-00752-8. [34] Grillanda, N., Chiozzi, A., Milani, G., Tralli, A. (2019). Collapse behavior of masonry domes under seismic loads: an adaptive NURBS kinematic limit analysis approach, Eng. Struct., accepted. [35] Milani, G., Taliercio, A. (2016). Limit analysis of transversally loaded masonry walls using an innovative macroscopic strength criterion, Int. J. Solids Struct., 81, pp. 274–293, DOI: 10.1016/j.ijsolstr.2015.12.004. [36] Cottrell, J.A., Hughes, T.J.R., Bazilevs, Y. (2009). Isogeometric Analysis: Toward Integration of CAD and FEA, John Wiley & Sons. [37] Milani, G., Milani, F. (2008). Genetic algorithm for the optimization of rubber insulated high voltage power cables production lines, Comput. Chem. Eng., 32(12), pp. 3198–3212, DOI: 10.1016/j.compchemeng.2008.05.010. [38] CNR-DT200. (2013). Instructions for the Design, Execution and Control of retrofit interventions on buildings by means of FRP composites (in italian), Italian Research Council. [39] McNeel, R. (2008). Rhinoceros: Nurbs Modeling for Windows, Robert McNeel & Associates. [40] USPRO. (1996). Initial Graphics Exchange Specification, IGES 5.3, U.S. Product Data Association. [41] De Felice, G., Universi, R.G., Studi, D., Tre, R. (2001). Out-of-Plane Seismic Resistance of Masonry Walls, J. Earthq. Eng., 5(2), pp. 253–271. [42] Aboudi, J. (2013). Mechanics of Composite Materials: A Unified Micromechanical Approach, Elsevier. [43] Milani, G., Taliercio, A. (2015). In-plane failure surfaces for masonry with joints of finite thickness estimated by a Method of Cells-type approach, Comput. Struct., 150, pp. 34–51, DOI: 10.1016/j.compstruc.2014.12.007. [44] Luciano, R., Sacco, E. (1998). Damage of masonry panels reinforced by FRP sheets, Int. J. Solids Struct., 35(15), pp. 1723–41. [45] Marfia, S., Sacco, E. (2001). Modeling of reinforced masonry elements, Int. J. Solids Struct., 38(24–25), pp. 4177–4198, DOI: 10.1016/S0020-7683(00)00297-3. [46] NTC2018. (2018). D.M. 17/01/2018 Aggiornamento delle «Norme tecniche per le costruzioni», S.O. alla G.U. n. 42 del 20/02/2018. [47] CIRC2009. (2009). Instructions for the Application of the New Italian Building Code D.M. 14/01/2008 (in Italian), G.U. n. 47 26/02/2009. [48] Ascione, L., Feo, L., Fraternali, F. (2005). Load carrying capacity of 2D FRP/strengthened masonry structures, Compos. Part B Eng., 36(8), pp. 619–626, DOI: 10.1016/j.compositesb.2004.12.004. [49] Caporale, A., Luciano, R., Rosati, L. (2006). Limit analysis of masonry arches with externally bonded FRP reinforcements, Comput. Methods Appl. Mech. Eng., 196(1), pp. 247–260, DOI: 10.1016/j.cma.2006.03.003. [50] Haupt, R.L., Haupt, S.E. (2004). Practical Genetic Algorithms, John Wiley & Sons. [51] Chong, V.L. (1993).The Behavior Of Laterally Loaded Masonry Panels With Openings. University of Plymouth, 1993. [52] Milani, G., Lourenço, P., Tralli, A. (2006). Homogenization Approach for the Limit Analysis of Out-of-Plane Loaded Masonry Walls, J. Struct. Eng., 132(10), pp. 1650–1663, DOI: 10.1061/(ASCE)0733-9445(2006)132:10(1650).