Issue 51

A. Namdar, Frattura ed Integrità Strutturale, 51 (2020) 267-274; DOI: 10.3221/IGF-ESIS.51.21 274 R EFERENCES [1] Namdar, A., Pelko, A. K. and Nusrath, A. (2010). Liquefaction mathematical analysis for improvement structures stability, Fract Struct Int, 4(14), pp. 75-80. DOI: 10.3221/IGF-ESIS.14.08. [2] Namdar, A. and Nusrath, A. (2010). Tsunami numerical modeling and mitigation, Fract Struct Int, 4 (12), pp. 57-62. DOI: 10.3221/IGF-ESIS.12.06. [3] Namdar, A. and Feng, X. (2014). Evaluation of safe bearing capacity of soil foundation by using numerical analysis method, Fract Struct Int, 8 (30), pp. 138-144. DOI: 10.3221/IGF-ESIS.30.18. [4] Namdar, A. and Pelko, M. K. (2009). Numerical analysis of soil bearing capacity by changing soil characteristics, Fract Struct Int, 3 (10), pp. 38-42. DOI: 10.3221/IGF-ESIS.10.05. [5] Zhelnin, M., Kostina, A., Plekhov, O., Panteleev, I. and Levin, L. (2019). Numerical analysis of application limits of Vyalov’s formula for an ice-soil thickness, Fract Struct Int, 13(49), pp. 156-166. DOI: 10.3221/IGF-ESIS.49.17. [6] Li, Y., Zhang, K., Liu, B. and Pan, Z. (2015). On the decay of strength in Guilin red clay with cracks, Fract Struct Int, 9(34). DOI: 10.3221/IGF-ESIS.34.66. [7] Namdar, A. and Pelko, M. K. (2009). Bearing capacity of mixed soil model, Fract Struct Int, 3 (7), pp. 73-79. DOI: 10.3221/IGF-ESIS.07.06. [8] Lazzarin, P., Livieri, P., Berto, F. and Zappalorto, M. (2008). Local strain energy density and fatigue strength of welded joints under uniaxial and multiaxial loading. Eng Fract Mech, 75 (7), pp. 1875-1889. DOI: 10.1016/j.engfracmech.2006.10.019. [9] Nicola Bonora, Domenico Gentile, Pietro Paolo Milella, Golam Newaz, Francesco Iacoviello. (2000). Ductile damage evolution under different strain rate conditions. Appl. Mech. Div. ASME, 246, pp 145-154. [10] Panin, S., Vinogradov, A., Moiseenko, D., Maksimov P., Berto, F., Byakov, A., Eremin, A., Narkevich. N., (2016). Numerical and Experimental Study of Strain Localization in Notched Specimens of a Ductile Steel on Meso- and Macroscales, Adv Eng Mater, 18(12), pp. 2095-2106. DOI: 10.1002/adem.201600206. [11] Boniardi, M., Tagliabue, C. and Venturini, N. (2006). R e sidual stress origin: Plastic deformation and machining, Metall Ital, 98(11), pp. 53-60. [12] Namdar, A., Dong, Y. and Liu, Y. (2019). The effect of nonlinearity of acceleration histories to timber beam seismic response, Mater Des Proces Communic, 1 (2), pp. 1-4. DOI:10.1002/mdp2.53. [13] Ayatollahi, MR., Rashidi Moghaddam, M. and Berto, F. (2015). A generalized strain energy density criterion for mixed mode fracture analysis in brittle and quasibrittle materials, Theor Appl Fract Mec, (79), pp. 70–76. DOI: 10.1016/j.tafmec.2015.09.004. [14] Košíková, B., Sláviková, E. and Sasinková, V. (2006). The use of various yeast strains for removal of pine wood extractive constituents, Wood Res. 51(4). pp. 47-54. [15] Iacoviello, F., Di Cocco, V. and Cavallini, M. (2015). Fatigue crack tip damaging micromechanisms in a ferritic- pearlitic ductile cast iron, Fract Struct Int, 9(33), pp. pages 111-119. DOI: 10.3221/IGF-ESIS.33.15. [16] Berto, F. and Foti, P. (2019). Evaluation of the Strain Energy Density Value without the Construction of the Control Volume in the Preprocessing Phase of the Finite Element Analysis, Proc Struct Integ, (18), pp. 183-188. DOI: 10.1016/j.prostr.2019.08.152. [17] Berto, F. and Razavi, J. (2019). Fatigueless structures inspired by nature: A case study, Mater Des Proces Communic, 1 (3), pp. 1-3. DOI: org/10.1002/mdp2.27. [18] Iacoviello, F., di Cocco, V., Cavallini, M., Marcu, T. and Molinari, A. (2005). Influence of sintered stainless steel microstructure on fatigue crack paths, Fatigue Fract Eng M, 28(1–2), pp. 187 ‐ 193. DOI: 10.1111/j.1460-2695.2005.00836.x. [19] Adelaide Parisi, M. and Piazza, M. (2015). Seismic strengthening and seismic improvement of timber structures, Constr Build Mater, 97 (30), pp. 55-66. DOI: 10.1016/j.conbuildmat.2015.05.093. [20] Namdar, A., Darvishi, E., Feng, X., Zakaria, I. and Yahaya, F.M. (2016). Effect of flexural crack on plain concrete beam failure mechanism - A numerical simulation. Fract Struct Int, 10 (36), pp. 168-181. DOI: 10.3221/IGF-ESIS.36.17. [21] Bellini, C., Di Cocco, V., Iacoviello, F. and Sorrentino, L. (2019). Experimental analysis of aluminium/carbon epoxy hybrid laminates under flexural load, Fract Struct Int, 13(49), pp. 739-747. DOI: 10.3221/IGF-ESIS.49.66. [22] https://strongmotioncenter.org/