Issue 41

F. Berto, Frattura ed Integrità Strutturale, 41 (2017) 475-483; DOI: 10.3221/IGF-ESIS.41.59 483 [8] Williams, M. L., On the stress distribution at the base of a stationary crack, J. appl. Mech., 24 (1957) 109-114. [9] Benthem, J. P., The quarter-infinite crack in a half-space; alternative and additional solutions, Int. J. Solids Struct., 16(2) (1980) 119-130. [10] Dhondt, G., On corner point singularities along a quarter circular crack subject to shear loading, Int. J. Fract., 89 (1998) L13-L18. [11] Paris, P. C., Sih, G. C., Stress analysis of cracks, in: Fracture toughness testing and its applications, ASTM STP 381, American Society for Testing and Materials, Philadelphia (USA), (1965) 30-81. [12] Timoshenko, S. P., Goodier, J. N., Theory of elasticity, third ed., McGraw-Hill Book Company, New York (USA), (1970). [13] Berto, F., Lazzarin, P., Recent developments in brittle and quasi-brittle failure assessment of engineering materials by means of local approaches, Mater. Sci. Eng. R, 75 (2014) 1-48. [14] Lazzarin, P., Berto, F., Elices, M., Gómez, J., Brittle failures from U- and V-notches in mode I and mixed, I+II, mode. A synthesis based on the strain energy density averaged on finite size volumes, Fatigue Fract. Engng Mater. Struct., 32 (2009) 671–684. [15] Torabi, A. R., Campagnolo, A., Berto, F., Mode II brittle fracture assessment of key-hole notches by means of the local energy, J. Test. Eval., 44 (2016) doi: 10.1520/JTE20140295. [16] Torabi, A. R., Campagnolo, A., Berto, F., Local strain energy density to predict mode II brittle fracture in Brazilian disk specimens weakened by V-notches with end holes, Mater. Design, 69 (2015) 22-29. [17] Berto, F., Lazzarin, P., Yates, J. R., Multiaxial fatigue of V-notched steel specimens: A non-conventional application of the local energy method, Fatigue Fract. Engng. Mater. Struct., 34 (2011) 921-943. [18] Berto, F., Campagnolo, A., Lazzarin, P., Fatigue strength of severely notched specimens made of Ti-6Al-4Vunder multiaxial loading, Fatigue Fract. Engng. Mater. Struct., (2015) doi: 10.1111/ffe.12272. [19] Lazzarin, P., Berto, F., Zappalorto, M., Rapid calculations of notch stress intensity factors based on averaged strain energy density from coarse meshes: Theoretical bases and applications, Int. J. Fatigue, 32 (2010) 1559-1567. [20] Yosibash, Z., Shannon, S., Computing edge stress intensity functions (ESIFs) along circular 3-D edges, Eng. Fract. Mech., 117 (2014) 127-151. [21] Omer, N., Yosibash, Z., On the path independency of the point-wise J integral in three dimensions, Int. J. Fracture, 136 (2005) 1-36. [22] Campagnolo, A., Berto, F., Lazzarin, P., The effects of different boundary conditions on three-dimensional cracked discs under anti-plane loading, Eur. J. Mech. – A/Solids, 50 (2015) 76-86.