numero26

E. Salvati et alii, Frattura ed Integrità Strutturale, 26 (2013) 80-91; DOI: 10.3221/IGF-ESIS.26.09 92 [9] Sha, G. T., Yang, C. T., Weight function of radial cracks emanating from a circular hole in a plate, ASTM. – Philadelphia, (1986) 573-600. [10] Tada, H., Paris, P., Irwin, G., The Stress Analysis of Cracks handbook, 2nd edition, Paris Productions Incorporated, St. Luis, Missouri, 8.3 (1985). [11] Murakami Y., Stress Intensity Factor handbook, Pergamon press, Oxford (1987). [12] Herz, E., Hertel, O., Vorrmwald M., Numerical simulation of plasticity induced fatigue crack opening and closure for autofrettaged intersecting holes, Engineering Fracture Mechanics, 78 (2011) 559-572. [13] H.F. Bueckner, A novel principle for the computation of Stress Intensity Factors, Zeitschrift Angewandte Mathematik und Mechanik, 50 (1970) 529-546. [14] Rice J., Some remarks on elastic crack-tip stress field, Int. J. of Solids Struct., 8 (1972) 751-758. [15] Niu, X., Glinka G., Weight function for edge and surface semi-elliptical cracks in flat plates and plates with corners. Engng Fracture Mech., 36 (1990) 459-476. [16] Petroski, H. Y., Achenbach F.D., Computation of the weight function from a stress intensity factor, Engng. Fracture Mech., 10 (1978) 257-266. [17] Glinka, G. Shen G., Universal features of weight functions for cracks in mode I, Department of Mechanics Engineering, University of Waterloo, Waterloo, Ontario, Canada N2L3G1, Engng Fracture Mech., 40(6) (1991) 1135- 1146. [18] ANSYS Online Manuals Release 5.5, Structural, Chapter 10: Fracture Mechanics (UP19980818) - http://mostreal.sk/html/guide_55/g-str/GSTR10.htm (2013). [19] Thumser, R., Numerical Stability of Plane Crack Paths under Mode I Loading, Crack Paths, In: CP2012, Gaeta, Italy (2012) 943-950.