General Papers
| 3D-Simulation of Ductile Cracking in Two-Phase Structural Steel with Heterogeneous Microstructure | |
| Mitsuru Ohata, Midori Suzuki, Anna Ui, Fumiyoshi Minami |
| 3D-Simulation of Ductile Cracking in Two-Phase Structural Steel with Heterogeneous Microstructure | |
| Mitsuru Ohata, Midori Suzuki, Anna Ui, Fumiyoshi Minami |
| A Consistent Anisotropic Brittle Damage Model Based on Growing Elliptical Microcracks | |
| Kianoush Molla-Abbasi, Henning Schütte |
| A Discussion on Fracture Energy of Vertical Joint in Concrete | |
| Ayumi Satoh, Kanji Yamada, Satoru Ishiyama |
| A Mechanistic Understanding of Stress Corrosion Cracking of Mg-Al Alloys | |
| Nicholas A. Winzer, A. Atrens, Wolfgang Dietzel, V. S. Raja, G. Song, K. U. Kainer |
| A Plasticity-like Framework for Fracture Mechanics | |
| Alberto Salvadori |
| A Probabilistic Model to Simulate Slender Reinforced Concrete Columns using Quasi-Monte Carlo Methods within SSJ Technology | |
| Ronald Schwuchow |
| Analysis of Fatigue Crack Propagation and Crack Shielding in Super Duplex Stainless Steel and its Welds | |
| Karel Sláme?ka, Guocai Chai, Jaroslav Pokluda |
| Analysis of Multiple Cracks in Thin Coating on Orthotropic Substrate | |
| Michal Kotoul, Tomáš Profant, Old?ich Ševe?ek |
| Analysis of the Behaviour of Crack Emanating From Microvoid in Cement of Reconstructed Acetabulum | |
| Bel Abbes Bachir Bouiadjra, Smail Benbarek, Mohamed Belhouari, Tarik Achour, Boualem Serier |
| Applicability of the Cohesive Model to Engineering Problems: on Parameter Identification for Ductile Materials | |
| Ingo Scheider, Norbert Huber, Karl-Heinz Schwalbe, Rajkumar Gurunathan |
| Assessment of Sub-Clad Flaw based on Finite Element Analyses | |
| Szabolcs Szávai, Róbert Beleznai, Tibor Köves |
| Behavior of Cracks in Cladded Components under Consideration of Residual Stresses | |
| Jörg Hohe, Marcus Brand, Dieter Siegele |
| Characteristics of Internal Fatigue Fracture of Shot-Peened Spring Steels | |
| Maya Sugimoto, Kenji Kanazawa |
| Characterization of the Cold Ductility Degradation after Aging of a Centrifugally Cast 20Cr32Ni+Nb Alloy | |
| Luis Monobe, Cláudio Schön |
| Constraint Effect in Tensile to Shear Type Transition | |
| Mahmoud Mostafavi, David Smith, Martyn Pavier |
| Constraint Effects in Creeping Solids under Biaxial Loading | |
| Valery Shlyannikov, Nataly Boychenko |
| Corrosion and Fracture of Ti Bioalloys | |
| Andrzej Zielinski, Sylwia Sobieszczyk |
| Corrosion-enhanced Fracture of the Cr-Ni-Mn Steel in Liquid Hydrocarbons | |
| Andrzej Zielinski, Beata Swieczko-Zurek |
| Crack Analysis in Magneto-electro-elastic Solids | |
| Jan Sládek, Vladimír Sládek, Peter Šolek |
| Crack Induced Stress and Generation of Twins and Dislocations in bcc Iron | |
| Alena Spielmannová, Anna Machová |
| Crack Initiation at the Inclusions under Static Loading | |
| Victor Sylovanyuk, Roman Yukhym |
| Crack Initiation at Thin-film Edges with Weak Singularity | |
| Lingyun Shang, Zhiliang Zhang, Bjorn Skallerud |
| Crack Initiation Life of Notched Specimens | |
| Janina Menke, Manuela Sander, Hans A. Richard |
| Crack Propagation in Anisotropic Inhomogeneous 2-D-Structures | |
| Martin Steigemann, Markus Fulland, Maria Specovius-Neugebauer, Hans A. Richard |
| Creep Fracture Mechanisms in Selected Discontinuously Reinforced Magnesium Metal Matrix Composites | |
| Václav Skleni?ka, Kv?ta Kucha?ová, Milan Svoboda |
| Determination of a Limit State of Elastic Solids with Thin-Walled Elastic Inclusions Using the J-integral | |
| Viktor Bozhydarnyk, Iaroslav Pasternak, Heorhiy Sulym |
| Disturbance of Long-range Order and Single Crystal State under Plastic Deformation in Ni3Fe | |
| Svetlana Starenchenko, Vladimir Starenchenko, Irina Radchenko |
| Ductile Tearing Resistance of Metal Sheets | |
| Wolfgang Brocks, Paul Anuschewski, Ingo Scheider |
| Dwell-Fatigue Behavior of a Near Alpha-Ti 6242 Alloy | |
| Pierre Lefranc, Christine Sarrazin-Baudoux, M. Gerland, Véronique Doquet, Jean Petit |
| Dynamic and Static Characterization of Recent Crack Arrest Tests of Navy and Nuclear Steels | |
| James A. Joyce, R.E. Link, C. Roe, J. C. Sobotka |
| Dynamic Crack Propagation: an Experimental-Numerical Approach | |
| Jesus Mediavilla, Jaap Weerheijm, Ronald van der Meulen, F. Soetens, C. Wentze, J. van Deursen |
| Effect of Prestrain on Ductility of a X100 Pipeline Steel | |
| Jacques Besson, Yasuhiro Shinohara, Thilo Morgeneyer, Yazid Madi |
| Effect of Temperature on the Cyclic Stress Components of Inconel 738LC Superalloy | |
| Martin Petrenec, Miroslav Šmíd, Karel Obrtlík, Jaroslav Polák |
| Effects of Tangential Strains and Shielding in Large Scale Yielding in Multi-Layered Architectures for Bearings | |
| Allan Burke-Veliz, Stavros Syngellakis, Philippa Reed |
| Electromagnetic Radiation Method for Identification of Multi-scale Fracture and Dynamic Parameters of thin Fibers | |
| Igor Simonov |
| Estimation of Apparent Fracture Toughness of Ceramic Laminates Based on Generalized Strain Energy Density Factor | |
| Luboš Náhlík, Lucie Šestáková, Pavel Huta? |
| Experimental Determination of J-integral at Elevated Temperatures | |
| Ljubica Milovic, Milorad Zrilic, Stojan Sedmak, Aleksandar Sedmak, Meri Burzic |
| Failure Analysis of Two Sets of Aircraft Blades | |
| Elena Silveira, Garbi?e Atxaga, Angel M. Irisarri |
| Failure of Hydrided Zircaloy-4 Fuel Cladding Tubes under RIA Loading Conditions | |
| Matthieu Le Saux, Jacques Besson, Sébastien Carassou, Christophe Poussard, Xavier Averty |
| Fatigue Behavior of High-chromium Alloyed Cold Work Tool Steel in the Gigacycle Regime | |
| Christian Sohar, Agnieszka Betzwar-Kotas, Christian Gierl, Brigitte Weiss, Herbert Danninger |
| Fatigue Damage in Copper Polycrystals Subjected to Ultrahigh-cycle Fatigue below the PSB Threshold | |
| Anja Weidner, Dorothea Amberger, Florian Pyczak, Bernd Schönbauer, Stefanie Stanzl-Tschegg, Haël Mughrabi |
| Fatigue Strength of Small-Defect-Containing Specimens under Combined Loading Involving Phase Difference and Mean Stress | |
| Masahiro Endo, Isao Ishimoto, Ken-ichi Iseda, Yuki Sakamoto |
| Finite Element Modeling of Plain Weave Composites for Flexural Failure | |
| Omer Soykasap |
| Fractographical Analysis of Fish-eye Formation under Multiaxial Fatigue | |
| Št?pán Major, Karel Sláme?ka, Marta Kianicová, Jaroslav Pokluda |
| Fracture Behaviour and Defect Assessment of Brazed Steel Joints | |
| Christian Leinenbach, Hans-Jakob Schindler, Tanya Baser, Niklaus Rüttimann, Konrad Wegener |
| Fracture Behaviour of Phosphorus-doped Polycrystalline Fe-2.3%V Alloy | |
| Pavel Lej?ek, Jaroslav Pokluda, Pavel Šandera, Jana Horníková, Bohumil Vlach, Monika Jenko |
| Fracture Process Zone Size and Energy Dissipated during Crack Propagation in Quasi-brittle Materials | |
| Ladislav ?outil, Václav Veselý, Zbyn?k Keršner, Stanislav Seitl, Zden?k Knésl |
| Geometric Dependence of Fracture Criteria in AL2024 | |
| Simon Lewis, Mahmoud Mostafavi, Martyn Pavier, David Smith, Christopher Truman |
| Hydrogen Effect on the Mechanical Properties and Fracture Mechanism of the Degraded Welded Joints from Steam Pipeline | |
| Oleksandra Student, Andriy Markov |
| Hydrogen Induced Cracking in Duplex 00H18N5M3S Stainless Steel | |
| Krystyna Lubli?ska, Andrzej Szummer, Krzysztof Jan Kurzyd?owski |
| In Situ SEM/EBSD Analysis of Fatigue Crack Propagation Behavior of a Super Duplex Stainless Steel | |
| Guocai Chai, Ru Lin Peng, Karel Sláme?ka, Sten Johansson |
| Influence of the Geometry on the Essential Work of Fracture of Polypropylene Materials | |
| Ralf Lach, Thomas Koch, Sabine Seidler |
| Investigations on Initiation and Growth of Fatigue Cracks | |
| Manuela Sander, Hans A. Richard, Janina Menke |
| Mechanical Properties of the Cell Wall Material of Closed-cell Al Foam | |
| Insu Jeon, Kiyotaka Katou, Tsutomu Sonoda, Tadashi Asahina |
| Mechanical Strength of Nano-Elements | |
| Takayuki Kitamura, Hiroyuki Hirakata, Takashi Sumigawa, Takahiro Shimada |
| Mechanisms of Fatigue Crack Initiation and Propagation in Hydro Pumps NP-89D of Aircraft Tu-154M of Cast Aluminum Alloy AL5 | |
| Andrey Shanyavskiy, Alexandre Toushentsov |
| Mechanisms of Fatigue Crack Initiation Subsurface and Growth of the Surface Hardened Titanium Alloy Ti-6Al-3Mo-0.4Si | |
| Andrey Shanyavskiy, Tatiana Zaharova, Yuriy Potapenko, Maxim Artamonov |
| Mechanisms of Strain Localization, Crack Initiation and Fracture of Polycrystalline Copper in the VHCF-Regime | |
| Stefanie Stanzl-Tschegg, Bernd Schönbauer |
| Mesomechanics of Multiple Cracking of Nanostructured Gradient Coatings under Loading | |
| Sergey Panin, Victor Panin, Alexey Panin, Victor Sergeev, Evgenii Evtushenko, Dmitrii Moiseenko |
| Methods for Introducing Pre-Cracks in Fracture Mechanics Testing of Polymers | |
| Joelmir Souza, Fabiano Peres, Cláudio Schön |
| Micromechanical Modelling of Multiple Fracture in Engineered Cementitious Composites | |
| Andrea Spagnoli, En-Hua Yang, Victor C. Li |
| Microscopic Deformation Behavior of Lamellar Pearlite Steel | |
| Yuu Sakoda, Suguru Kashiwagi, Shigeru Hamada, Hiroshi Noguchi |
| Microstructural Interpretation of Effective Fatigue Threshold of Structural Steel | |
| Jaroslav Pokluda, Yoshiyuki Kondo, Karel Sláme?ka, Vladislav Kozák, Jana Horníková, Pavel Šandera |
| Microstructure Based Upper Shelf Charpy Toughness Prediction of HSLA Steels | |
| Florian Thönnessen, Sebastian Münstermann, Wolfgang Bleck, Philippe Thibaux, Martin Liebeherr, Thomas Schramm |
| Mode Mixity and Constraint Parameters Accounting for Crack Tip Curvature | |
| Valery Shlyannikov, Svetlana Kislova |
| Modeling of Interface Crack Growth using Discontinuous Galerkin Method | |
| Felicia Stan |
| Modelling of Ductile Crack Growth in Welded Joints using Micromechanical Failure Criterion | |
| Marko Rakin, Nenad Gubeljak, Milos Dobrojevic, Bojan Medjo, Aleksandar Sedmak |
| Numerical Determination of Fatigue Crack Growth in 3D Structures Consisting of Non-homogeneous and/or Non-isotropic Materials | |
| Markus Fulland, Martin Steigemann, Hans A. Richard, Maria Specovius-Neugebauer |
| Numerical Optimization of Properties of Solidifying Ceramic Material EUCOR | |
| František Kavi?ka, Karel Stránský, Josef Št?tina, Jana Dobrovská, Bohumil Sekanina |
| On a Numerical Scheme for Curved Crack Propagation Based on Configurational Forces and Maximum Dissipation | |
| Henning Schütte |
| On the Micromechanisms of Fatigue Long Crack Growth under Remote Shear Loading Modes | |
| Libor Holá?, Anton Hohenwarter, Karel Sláme?ka, Reinhard Pippan, Jaroslav Pokluda |
| Performance Comparison of Railway Wheel in Terms of Fracture Mechanics and Flat Generation | |
| Seok Jin Kwon, Dong Hyung Lee, Jung Won Seo, Won Hee You |
| Problems of Crystallization of B2-FeAl Based Alloys | |
| Jaromír Kope?ek, Karel Jurek, Vladimír Šíma, Pavel Lej?ek |
| Pseudo-Shell Model for Crack Analysis of Tunnel Linings | |
| Zihai Shi, Masaaki Nakano |
| Ratcheting of High Temperature Materials at Thermal Cyclic Loading | |
| Leonid Getsov, Alexandr Rybnikov, Artem Semenov |
| Simulation of Fatigue Fracture Propagation in Concrete using a Lattice Model | |
| Andrea Carpinteri, Andrea Spagnoli, Li-Ping Guo, Sabrina Vantadori |
| Single Overload Effect in Short Crack | |
| Tomoe Sudo, Masanobu Kubota, Yoshiyuki Kondo |
| Strain Induced Martensitic Transformation in two Austenitic Stainless Steels: Macro-Micro Behaviour | |
| Stéphanie Nanga, André Pineau, Benoît Tanguy, Pierre- Olivier Santacreu |
| Strength Mis-Match Effects on Limit Loads for Surface Cracked Tensile Plates | |
| Tae-Kwang Song, Yun-Jae Kim, Jong-Sung Kim, Tae-Eun Jin |
| Stronger and Weaker Singularity of an Inclined Crack Terminating at the Orthotropic Bimaterial Interface | |
| Tomáš Profant, Michal Kotoul, Old?ich Ševe?ek |
| Study on Establishing Creep Testing Method using Miniature Specimen of Lead Free Solders | |
| Akira Ueno, Naohiro Takami, Reiji Sato |
| Tensile and Fatigue Behavior of Poly-p-Phenylene Benzobisoxazole (PBO) Fibers | |
| Noriyo Horikawa, Yukihiro Nomura, Tooru Kitagawa, Yoshio Haruyama, Akiyoshi Sakaida, Takashi Imamichi |
| The Damage Mechanics of Creep Thickness Effects of the Single Crystal Superalloys | |
| Alexander Staroselsky, Brice Cassenti |
| The Decrease of Tensile Strength for the Notched Specimens in the Hydrogen Gas | |
| Hisatake Itoga, Yuichi Suzuki, Hiroshi Noguchi |
| The Effect of Electromagnetic (i.e. Induction) Stirring of the Melt of Concast Billets on the Reduction of their Surface Defects | |
| Karel Stránský, František Kavi?ka, Josef Št?tina, Bohumil Sekanina, Lubomír Stránský |
| The Influence of Bi-material Interface on Crack Propagation Paths | |
| Liviu Marsavina, Tomasz Sadowski |
| The Influence of Twinning in B19' Martensitic Structure of NiTi Alloy on Mechanical Properties from First Principles | |
| Petr Šesták, Miroslav ?erný, Jaroslav Pokluda |
| The Influence of Vertex Singularities on Fatigue Crack Shape | |
| Pavel Huta?, Luboš Náhlík, Zden?k Knésl, Stanislav Seitl |
| The Regularities of the Acoustic Emission at High-temperature Deformation and Fracture | |
| Mikhail Starostenkov, Vladimir Plotnikov, Sergey Makarov |
| The Specific of the Creep Process in Hydrogen of the Degraded in Service 2.25Cr-Mo Steel | |
| Andzej Zagórski, Oleksandra Student, Leontiy Babiy, Hryhoriy Nykyforchyn, Krzysztof Jan Kurzyd?owski |
| Thermal Fracture of a FGM/Homogeneous Bimaterial with Defects | |
| Vera Petrova, Siegfried Schmauder |
| Transition of Acceleration Behavior and Life Time Prediction of Mg-Al Solution Hardened Alloys at around 0.6Tm | |
| Hiroyuki Sato, Takaya Miyano |
| Weak Fiber\matrix Interface Degradation and the Crack Tip Energy Dissipation. | |
| Kirill Khvostunkov, Aleksey Shpenev |
| Yield Load Solutions of Heterogeneous Welded Joints | |
| Drazan Kozak, Nenad Gubeljak, Pejo Konjatic, Josip Sertic |