General Papers
| Failure Mechanisms of Composite Sandwich Beams under Impact Loading | |
| J.L. ABOT, I.M. DANIEL, E.E. GDOUTOS |
| The Effects of Correlated Input Data on Estimates of Failure Probability | |
| R.A. AINSWORTH, Y. LEI |
| High Temperature Creep-Fatigue Crack Initiation in 718-DA Ni Based Superalloy | |
| F. ALEXANDRE, R PIQUES, S. DEYBER, A. PINEAU |
| Development of Damage in Thin Plates under Cyclic Loading | |
| S.E. ALEXANDROV, E.A. LYAMINA |
| Crack-Healing Behaviour under Cyclic Stress and Resultant Fatigue Strength of Si3N4 Composite Ceramics | |
| K. ANDO K, K. TAKAHASHI, S. NAKAYAMA, S. SAITO |
| Fatigue Strength of Crack-Healed Si3N4 at Elevated Temperature | |
| K. ANDO, F. YAO, M.C. CHU, S. SATO |
| The Effective Resistance of Pipeline Steels to Running Ductile Factures; Modelling of Laboratory Test Data | |
| R.M. ANDREWS, I.C. HOWARD, A. SHTERENLIKHT, J.R. YATES |
| Fracture of Bimetallic Structural Elements under Hydrogen - Temperature Interaction | |
| O.YE. ANDREYKIV, O. HEMBARA, V. SKALSKY |
| A New Method for Fatigue Testing and Data Presentation: an Illustration on Some Metallic Ceramic and Polymer Materials | |
| D.G. ANGELOVA |
| Modelling of Hydrogen Embrittlement of Metals in Wet H2S Containing Environments | |
| V.I. ASTAFIEV |
| Creep Behaviour of a y Ti - Al Intermetallic Alloy | |
| G. ATXAGA, E. ERAUZKIN, A.M. IRISARRI |
| Sensitivity to Defects and Fracture Mechanics for Metallic Materials under Fatigue Loading | |
| B. ATZORI, P. LAZZARIN, G. MENEGHETTI |
| Frontal Process Zone Toughening Mechanism of Ceramic-Based Nanocomposites | |
| H. AWAJI, S-M. CHOI |
| Finite Element Study of a Double Edge Crack Specimen | |
| M.R. AYATOLLAHI, A. ASADKARAMI |
| A New Specimen for Mode II Fracture Tests | |
| M.R. AYATOLLAHI, M.J. PAVIER, D.J. SMITH |
| Evaluation of the Stress Intensity Factors for Patched Cracks with Bonded Composite Repairs in Mode I and Mixed Mode | |
| B. BACHIR BOUIADJRA, M. BELHOUARI, N. RANGANATHAN |
| Anisotropic Damage Model for Concrete Including Effect of Crack Closure in Compression | |
| P.B. BADEL, J.B. LEBLOND |
| Fracture Toughness of Electron Beam Welded Ti - 6Al - 4V Plates | |
| J.L BARREDA, X. AZPIROZ, J.M. VARONA, A.M. IRISARRI |
| Correlation Between Experiments and Strip Yield Model Results on Fatigue Crack Growth in a Structural Steel | |
| S. BERETTA, M. CARBONI, T. MACHNIEWICZ, M. SKORUPA |
| A Formalism to Model Environment-Sensitive Fatigue Crack Growth | |
| F. BERGNER |
| A Constraint Based Statistical Approach to Failure from Complex Defects | |
| B. BEZENSEK B., J.W. HANCOCK |
| Failure and Damage Analysis of the Cast Element | |
| M. BIEL GOLASKA M., R. ZUCZEK, J. LACHOWSKI |
| Integrity Assessment of Pressure Vessels Containing Random Number of Defects | |
| V. BINA, O. BIELAK |
| A Unified Description of Nucleation, Propagation, and Proliferation of Cracks under Creep Conditions | |
| A. BODNAR, M. CHRZANOWSKI, K. NOWAK |
| Application of the Master Curve Approach for Dynamically Loaded Pressure Vessel Steels | |
| J. BOEHMERT, H.-W. VIEHRIG, A. GOKHMAN |
| The Behaviour of Kinked RCF Cracks in Contact | |
| S. BOGDANSKI |
| Laser Grating Extensometer LES for Whole-Field Strain Analysis in Fatigue | |
| D. BORONSKI, J. SZALA |
| Plasticity and Roughness Induced Closure in Aged Hardened Aluminium Alloys | |
| L.P. BORREGO, J.M. FERREIRA, J.M. COSTA |
| New Characteristics of Radiation Defects Evolution and Interaction | |
| L.R. BOTVINA, N.A. ZHARKOVA |
| Damage and Crack Propagation Theories Applied to Sheet Metal Cutting | |
| P.O. BOUCHARD, F. BAY |
| Three-Dimensional Boundary Element Analysis of the Behaviour of Quarter-Elliptical Corner Cracks Emanating from Fastener Holes | |
| B. BOUTABOUT, B. BACHIR BOUIADJRA, N. RANGANATHAN |
| New Fracture Criteria of Anisotropic Bodies with Cracks | |
| V.V. BOZHYDARNYK, G.T. SULYM |
| Fracture of Brittle Discs under Biaxial Loading | |
| A. BÖRGER, P. SUPANCIC |
| A Creep Fatigue Crack Propagation Study of the PM Nickel Based Superalloy UDIMET 720 Li | |
| C.M. BRANCO, A.S. BRITO, J. BYRNE |
| Fracture Mechanics Assessment of a Bi-Metallic Welded Joint | |
| W BROCKS, A. CORNEC, W. SCHÖNFELD |
| Ductile rupture of 2024 aluminum thin sheets - Experimental study of damage growth and crack initiation | |
| F. BRON, J. BESSON, A. PINEAU, J.-C. EHRSTROM |
| Effect of Displacement Rate on Fracture Toughness of Austenite in Ductile Fracture and Stress Corrosion Cracking at Temperature of 250°C | |
| A. BROZOVÄ, M. ERNESTOVÄ |
| Simulation of Multiaxial Service Loading with a View to Fatigue Life Prediction | |
| J. CACKO J. |
| Circumferentially Notched Pipe with an External Surface Crack under Tension and Bending | |
| A. CARPINTERI, R. BRIGHENTI, S. VANTADORI |
| Interaction of Two Hard Indenters in the Cutting Process of Quasi-Brittle Materials | |
| A. CARPINTERI A., B. CHIAIA, S. INVERNIZZI |
| Bridged or Cohesive Crack in Bending of Fibre-Reinforced Beams | |
| A. CARPINTERI, G. FERRO, G. VENTURA |
| Critical Plane Approach for Fatigue Life Estimation under Multiaxial Random Loading | |
| A. CARPINTERI, A. SPAGNOLI, S. VANTADORI |
| Damage and Fracture of High Strength Stainless Steel Strip During Repeated Impact Loading | |
| G. CHAI G., F. SANDBERG |
| A Proposal for Parameters Identification of the GTN Model - Application to CT Specimen | |
| J. CHAMBERT, PH. BRESSOLETTE |
| Growth Potential of High Aspect Ratio Elliptic Delaminations | |
| P. CZARNOCKI |
| Fracture of New Joints of Aero Structures | |
| M.A. DEBSKI, K.M. GOLOS, D.K. DEBSKI |
| Fracture Mechanics Applications to SCC beyond K | |
| W. DIETZEL |
| Applicability of the Chevron-Notch Technique for Fracture Toughness Determination in Glass | |
| I. DLOUHY I., Z. CHLUP, A.R. BOCCACCINI |
| Model of Surface Fatigue Crack Nucleation as Result of Corrosion Deformation Interactions | |
| I.M. DMYTRAKH, A.M. SYROTYUK, R.S. HRABOVSKYI |
| The Geometry and Size Dependence of the Common Format Constraint Factor | |
| J.R. DONOSO J.R., U. MUEHLICH, J.D. LANDES |
| Assessment of Steel Sensitivity to Hydrogen Induced Cracking | |
| J. DZIUBINSKI, P. ADAMIEC |
| Metal/Ceramic Thin Film Adhesion Measured by Cross-Sectional Nanoindentation | |
| M.R. ELIZALDE M.R., J.M. SÁNCHEZ, J.M. MARTÍNEZ-ESNAOLA, D. PANTUSO, T. SCHERBAN, B. SUN, J. XU |
| Novel Test Criteria for Determining Fracture Toughness under Pure Mode-II and Mixed-Mode Loading | |
| D. FERNÁNDEZ-ZÚNIGA, A. FERNÁNDEZ-CANTELI, M. DOBLARÉ, J.F. KALTHOFF, D. BERGMANNSHOFF |
| Predictive Fracture Model for the Steady-State Failure of Adhesive Joints Using the «Plastic Wedge Peel Test» | |
| T. FERRACIN, J. SENER, C.M. LANDIS, F. DELANNAY, T. PARDOEN |
| Contact Strength of Ceramics under Opposed Roller Loading | |
| T. FETT, D. MUNZ, G. THUN |
| Fatigue of Composite Pipe Joint under Axial Tension | |
| T. FIGIEL, M. KAMINSKI |
| Cleavage Fracture of an Eurocode 3 Structural Steel S460N Type | |
| J.M. FLORES, A. VALIENTE, M. ELICES |
| Implementation of Damage Tolerance in High Cycle Fatigue Systems | |
| S.C. FORTH S.C. |
| The Effect of Strain Rate on Steel Wires Failure During Cold Drawing | |
| F. GÁLVEZ F., J.M. ATIENZA, J. RUIZ, M. ELICES |
| Fatigue of Materials under Cyclic Loading with Participation of the Mean Load | |
| G. GASIAK G., R. PAWLICZEK |
| Description of Fatigue Crack Rate with the Use of AJ Integral Range for Notched Specimens under Tension and Bending | |
| G. GASIAK, D. ROZUMEK, R. PAWLICZEK |
| Stiffness Changes in Fiber-Reinforced Polymeric Matrix Laminates Caused by Intralaminar Damage | |
| J. GERMAN |
| Modeling of Deformation and Fracture Processes under the Thermomechanical Action | |
| R.V GOLDSTEIN, I.V. KADOCHNIKOV, YU.V. ZHITNIKOV |
| Dwell Time Effects on Fatigue Life and Damage Mechanisms | |
| T. GOSWAMI, J. KROHN, H. HANNINEN |
| Initiation and Growth Behaviour of Smooth Specimens Cut from the Squeeze Cast Al Alloy Car Wheels | |
| M. GOTO, T. YAMAMOTO, H. NISITANI, N. KAWAGOISHI |
| Requirements on the Specimen Geometry to Determine Intrinsic Fracture Mechanics Values of Polymer Materials | |
| W. GRELLMANN, R. LACH, S. SEIDLER |
| The SIF Calculation of Internal Cracks under Rolling Contact Loads by a Weight Function Approach | |
| M. GUAGLIANO, L. VERGANI |
| Constraint Effect on Fracture Behaviour on Strength Mis-matched Weld Joints | |
| N. GUBELJAK, I. SCHEIDER, M. KOQAK, M. OBLAK, J. PREDAN |
| The Applicability of Fracture-mechanics Considerations to the Fatigue - and Fracture Behaviour of Thin Metallic Foils | |
| A. HADRBOLETZ, A. KOTAS, G. KHATIBI, B. WEISS |
| Cyclic Crack Tip Deformation Due to Single Transition Cycles in Biaxial Loading | |
| M.M.I. HAMMOUDA, H.E.M. SALLAM, A.S. FAYED |
| Fracture Toughness Prediction for a Low-alloy Steel in the DBBT range | |
| P. HAUSILD, C. BERDIN, P. BOMPARD, C. PRIOUL, A. PARROT |
| Investigations of Stress State in Cracked Steel Specimens and Wide Plates Containing Laser Beam Welds | |
| J. HEYER, P. LANGENBERG, W. DAHL |
| Bioactive Ability of Alkali Treated Titanium Alloy | |
| N. HISAMORI, A. NOZUE, M. AIZAWA, H. SUEMASU |
| Guideline on Fracture Mechanics Proof of Strength for Engineering Components | |
| L. HODULAK, J.G. BLAUEL, C. BERGER, B. PYTTEL, C.P. GERDES |
| Damage Evolution During Cyclic Plastic Deformation of Pipeline Steel | |
| C.H.L.J. HORN TEN, A. BAKKER, J. ZUIDEMA |
| An Analysis of the Effect of Hammer Peening on the Repair of Fatigue Cracked Welded Joints | |
| V. INFANTE, C.M. BRANCO, R. BAPTISTA |
| Fully Predictive Model of RCP in Plastic Pipes | |
| A. IVANKOVIC, V. TROPSA, H. JASAK, P.S. LEEVERS |
| Effect of Heat Treatment on Fracture Properties of High-Chromium White Cast Iron | |
| M. JANSSEN, M.B. VAN LEEUWEN, M.F. MENDES DE LEON |
| Photoelastic and Numerical Models of the Fracture in the Multi-Layered Composites | |
| M. JARONIEK |
| One Approach to Fatigue Assessment of the Components Subjected to Combined HCF/LCF Loading | |
| D. JELASKA D. |
| Investigation of Specimen Geometry Effects and Material Inhomogeneity Effects in A533B Steel | |
| J.A. JOYCE, R.L. TREGONING |
| Strength of Yttria-Stabilised Zirconia with Near-Surface Grinding Residual Stresses | |
| A. JUY, L. LLANES, M. ANGLADA |
| On Some 3-D Thermoelastic Problems of Periodically Layered Composites Containing Interface Cracks | |
| A. KACZYNSKI A., S.J. MATYSIAK |
| Thermal Stresses Around Interface Penny-Shaped Crack in a Laminated Composite | |
| A. KACZYNSKI A., B.YE. MONASTYRSKYY |
| Mechanisms of Internal Fatigue Fracture for a Low Alloy Steel under High Cycle Region at Elevated Temperatures | |
| K. KANAZAWA K., T. NISHIMURA, K. MATSUDA, K. YAMAGUCHI |
| Mechanistic Aspects of Hydrogen Damage in Fatigue Fracture of High Strength Bolt Steel | |
| N. KANEUCHI, T. SUZUKI, K. YAMADA |
| Analysis of Fatigue Cracks Propagation in Complex Structures | |
| J. KANIOWSKI J., J. SZALA |
| Critical Planes in the Round Section of an Element Taking the Stress Gradient into Account | |
| A. KAROLCZUK A., A. NIESLONY, T. LAGODA |
| Local and Global Approaches to Giga Cycles Fatigue Threshold | |
| Y. KATZ, Y. MURAKAMI, W.W. GERBERICH |
| Influence of Pre-Strain on Fatigue Strength of Squeeze Cast Al-Alloy | |
| N. KAWAGOISHI, H. NISITANI, M. GOTO |
| Reference Stress Based J and COD Estimation for Leak-Before-Break Analysis of Pressurised Piping | |
| Y.-J. KIM, N.-S. HUH |
| Fracture Analyses of Circumferential Surface Cracked Pipes | |
| Y.-J. KIM, J.-S. KIM, Y.-W. PARK |
| Fatigue Short Crack Behaviour in the Surface Treated Medium Carbon Steel | |
| D. KOCANDA D., S. KOCANDA |
| Influence of Environment on Fatigue Crack Growth in Titanium Aluminides and Hydrogen Evolution Behavior Evaluated by Thermal Desorption Spectroscopy | |
| K. KOMAI, K. MINOSHIMA, K. OBARA, N. MINAMINO |
| The Fretting Fatigue Limit Based on Local Stress at the Contact Edge | |
| Y. KONDO, C. SAKAE, M. KUBOTA, T. NAGASUE, S. SATO |
| Thermo-Mechanical Effect and Criterion of Crack Propagation | |
| A.G. KOTOUSOV |
| Stress Intensity Factor for Small-to-Medium Edge Cracks | |
| A.G. KOTOUSOV, R. JONES |
| Strip Yield Model for a Crack in a Plate of Arbitrary Thickness | |
| A.G. KOTOUSOV, C.H. WANG |
| Physical Fundamental of Local Approach to Cleavage Fracture of Metals and Alloys | |
| S. KOTRECHKO |
| Physical Nature of Brittle Strength Anisotropy of Deformed Metal | |
| S. KOTRECHKO, YU. MESHKOV, V. DNEPRENKO, N. STETSENKO |
| The Influence of Notch Geometry and Non-Linearity on the SIF in Case of Three-Point Bend Marble Specimens | |
| S.K. KOURKOULIS, G.E. EXADAKTYLOS, I. VARDOULAKIS |
| Constraint Phenomena on the Pre-Cracked Specimens: Numerical and Experimental Evaluation | |
| V. KOZAK, L. VLCEK |
| Influence of Pre-Exposition and Pre-Loading on the Environmental Stress Cracking of a PBT/PBA Co-Poly(Ester Ester) | |
| N.B. KUIPERS, A.C. RIEMSLAG, R.F.M. LANGE, M. JANSSEN, R. MARISSEN, A. BAKKER |
| Probabilistic Approach for Modeling of Aggressive Environment Influence on Creep Rupture | |
| D.A. KULAGIN, A.M. LOKOSHCHENKO |
| Limit Equilibrium of a Piecewise-Homogeneous Cylindrical Shell with Cracks | |
| R.M. KUSHNIR, M.YO. ROSTUN |
| Time-Changeable Fracture Mechanics Parameters for Polymers under Impact Loading | |
| R. LACH, S. SEIDLER, S. SEIDLER, W. GRELLMANN, W. GRELLMANN |
| Investigation of the Brittle Failure Properties of an A42 Pipeline Steel Butt Weld: Comparison of the Base Metal, Simulated HAZ and Weld Metal | |
| L. LAM THANH, R. PIQUES, A.F. GOURGUES, R. BATISSE, P. WIDENT |
| Stress Corrosion Cracking Study of Austenitic Stainless Steels by the Drop Evaporation Test | |
| S. LASEK, V. CIHAL, M. BLAHETOVA |
| Determination of J-Q Locus for Material of Reactor Pressure Vessel WWER 440 at Cleavage Fracture | |
| D. Lauerova, Z. FIALA, J. NOVAK |
| Local Approach Treatise of High Y/T - Ratio Steels in the Ductile-to-Brittle Transition Region | |
| A. LAUKKANEN, K. WALLIN, P. NEVASMAA, K. RAHKA |
| Failure Probability Model of Buried Pipeline | |
| O.S. LEE, J.S. PYUN, S.W. HWANG |
| Brittle Slow Crack Growth in Polyamide 11: Mechanics and Mechanisms (Creep and Ageing) | |
| X. LEFEBVRE, L. LAIARINANDRASANA, G. PERRIN, A. DRIANCOURT, R. PIQUES |
| A Criterion for Joints Failure | |
| D. LEGUILLON |
| J and Limit Load Analysis of Semi-Elliptical Surface Cracks in Plates under Tension | |
| Y. LEI, P.J. BUDDEN |
| On the Applicability of Magnetic Emission Measurement Technique for Dynamic Fracture Toughness Determination of Large Specimens | |
| GY.B. LENKEY |
| Application of the Beremin-Model for Predicting the Brittle Fracture Resistance of Steel for Spent Nuclear Fuel Containers | |
| GY.B. LENKEY, ZS. BALOGH, L. TÓTH |
| A Study of Post Plating Heat Treatment in Automotive Fastener Steels | |
| B. LONYUK B., R. HOP, D.N. HANLON, S. VAN DER ZWAAG, J. ZUIDEMA, A. BAKKER |
| Residual Fatigue Life of Flash Welded Steel Joints: Microstructural and Overloading Effects | |
| M.R. LOPES, M.V. PEREIRA, F.A. DARWISH, S.H. MOTTA, M.A. CARNEIRO |
| Statistical Evaluation of Composites Fatigue Results Using Normalizing Techniques | |
| M. LÓPEZ-AENLLE, A. FERNÁNDEZ-CANTELI, M.J. LAMELA, E. CASTILLO |
| Fracture Statistics of Brittle Materials: How to Choose a Better Distribution Function | |
| C. LU, R. DANZER, F.D. FISCHER |
| Strength and Fracture Toughness of the ESIS Silicon Nitride Reference Material | |
| T. LUBE, R DANZER, J KÜBLER, J. DUSZA, J.-P. ERAUW, H. KLEMM, V.M. SGLAVO |
| Prediction of Fracture in Plane Elements with Sharp Notches | |
| A. LUKASZEWICZ, A. SEWERYN |
| Initiation and Growth of Thermal Fatigue Crack Networks in a 304 L Type Steel | |
| V. MAILLOT, A. FISSOLO, G. DEGALLAIX, B. MARINI, J.-C. LE ROUX |
| Fatigue Crack Nuclei in Austempered Ductile Cast Iron | |
| T.J. MARROW, H. QETINEL, M. AL-ZALMAH |
| X-ray Tomography of Short Fatigue Cracks in Ductile Iron | |
| T.J. MARROW, H. QETINEL, S. MACDONALD, P.J. WITHERS, A. VENSLOVAS, M. LEONAVIQIUS |
| Controlled Crack Growth with a Dual-Tip Indenter | |
| A. MARTÍN-MEIZOSO, J. GIL-SEVILLANO, J.M. MARTÍNEZ-ESNAOLA, M. FUENTES |
| An Assessment of the Probability of Root Failures in Load Carrying Cruciform Joints of Duplex Stainless Steel 2205 | |
| R.F. MARTINS, C.M. BRANCO |
| Damage Process and Crack Propagation in Materials | |
| YU.G. MATVIENKO |
| Interaction of the Mode III Interface Crack with a Thin Stiff Nonideal Interface | |
| G.S. MISHURIS |
| Creep and Creep-Fatigue Crack Behaviour of 1Cr- and Modified 10Cr-steels in Air and Inert Gas | |
| F. MUELLER, A. SCHOLZ, J. GRANACHER, G. SCHELLENBERG, W. STADTMUELLER, A. KLENK |
| Growth Mechanism and Threshold of Mode II and Mode III Fatigue Crack | |
| Y. MURAKAMI, R. KUSUMOTO, K. TAKAHASHI |
| Investigations on the Dynamic Fracture Toughness Behaviour of Nodular Cast Iron | |
| K. MÜLLER K., W. BAER, P. WOSSIDLO, D. KLINGBEIL |
| Fracture Model in Bonded Joints: Initiation and Propagation | |
| A. MÜNCH A., Y. OUSSET |
| Influence Factors of the Formation of ODA in Ultralong Fatigue Life Regime | |
| J. NAGATA, Y. MURAKAMI |
| Fatigue Life under Variable Amplitude Loading in a High Strength Steel Showing Step-Wise S-N Curve | |
| M. NAKAJIMA, K., TOKAJI, H. ITOGA, T. SHIMIZU |
| Fatigue Crack Growth in Re-welded AISI 4130 High Strength Steel | |
| M.P. NASCIMENTO, R.B. RIBEIRO, H.J.C. VOORWALD |
| Single-Parameter Prediction of Stable Crack Growth in Large-Scale Panels | |
| V.P. NAUMENKO |
| Modification of Dugdale Model to Include the Work Hardening and in and out of Plane Constraints | |
| A. NEIMITZ |
| Normalisation of Material Crack Resistance Curves by the T Stress | |
| B. NYHUS, Z.L. ZHANG, C. THAULOW |
| Fatigue Damage Description of Steels at Elevated Temperatures | |
| J. OKRAJNI, G. JUNAK |
| Material Characterisation for Ductile Fracture by Testing of Notched Tensile Specimens | |
| V. OLDEN, Z.L. ZHANG |
| Assessment of the Fatigue Failure Period of a Notched Component | |
| O.P. OSTASH, R.V. CHEPIL |
| Interpretation and Inverse Analysis of the Wedge Splitting Test | |
| L. 0STERGAARD, H. STANG, J.F. OLESEN |
| Methods for Residual Life Estimation of Welded Joints | |
| V.V. PANASYUK, O.YE. ANDREYKIV, M.V. LISHCHYNSKA |
| Evolution of a System of Edge Cracks in the Region of Rolling Bodies Cyclic Contact | |
| V.V. PANASYUK, O.P. DATSYSHYN, A.B. LEVUS |
| Prediction of Ductile Fracture of High-Rate Loaded Steel Structures | |
| G. PAPE, M. JANSSEN, A. BAKKER |
| Grain Boundary Versus Transgranular Ductile Failure in Aluminum Alloys | |
| T. PARDOEN T., D. DUMONT, A. DESCHAMPS, Y. BRECHET |
| Micromechanics-Based Model for Trends in Toughness of Ductile Metals | |
| T. PARDOEN, J.W. HUTCHINSON |
| Validation of R6 Using Finite Element Analyses of Cracked Cylinders under Thermal Loading | |
| R.D. PATEL |
| Fracture Model for an Interface Crack with Bridged Zone | |
| M.N. PERELMUTER |
| Effect of Hydrogenation and Plastic Predeformation on the Crack Growth Resistance of Structural Steel | |
| D.YU. PETRYNA, A.D. MARKOV, YE.I. KRYZHANIVSKYI, H.M. NYKYFORCHYN |
| Analysis of Ductile Mixed-Mode I/II Fracture Initiation with a Nonlinear CDM Model | |
| A. PIRONDI, N. BONORA |
| Fatigue Damage Evolution in Unidirectional CFRP | |
| A. PLUMTREE, L. SORENSEN |
| Linear and Geometric Nonlinear Finite Element Analysis of Cracked Square Plates under Mode I and Mode II Loading | |
| L.P. POOK |
| Influence Factors of the Formation of ODA in Ultralong Fatigue Life Regime | |
| J. NAGATA, Y. MURAKAMI |
| Fatigue Life under Variable Amplitude Loading in a High Strength Steel Showing Step-Wise S-N Curve | |
| M. NAKAJIMA, K. TOKAJI, H. ITOGA, T. SHIMIZU |
| Fatigue Crack Growth in Re-welded AISI 4130 High Strength Steel | |
| M.P. NASCIMENTO, R.B. RIBEIRO, H.J.C. VOORWALD |
| Single-Parameter Prediction of Stable Crack Growth in Large-Scale Panels | |
| V.P. NAUMENKO |
| Modification of Dugdale Model to Include the Work Hardening and in and out of Plane Constraints | |
| A. NEIMITZ |
| Normalisation of Material Crack Resistance Curves by the T Stress | |
| B. NYHUS, Z.L. ZHANG, C. THAULOW |
| Fatigue Damage Description of Steels at Elevated Temperatures | |
| J. OKRAJNI, G. JUNAK |
| Material Characterisation for Ductile Fracture by Testing of Notched Tensile Specimens | |
| V. OLDEN, Z.L. ZHANG |
| Interpretation and Inverse Analysis of the Wedge Splitting Test | |
| L. 0STERGAARD, H. STANG, J.F. OLESEN |
| Methods for Residual Life Estimation of Welded Joints | |
| V.V. PANASYUK, O.YE. ANDREYKIV, M.V. LISHCHYNSKA |
| Evolution of a System of Edge Cracks in the Region of Rolling Bodies Cyclic Contact | |
| V.V. PANASYUK, O.P. DATSYSHYN, A.B. LEVUS |
| ESIS TC 8 - Numerical Round Robin on Micro-Mechanical Models - Results of Phase II/Task B2 on Cleavage Toughness Prediction on CT Specimen | |
| C. POUSSARD, C. SAINTE CATHERINE |
| Interaction between the Faces of a Squat-type Fatigue Crack Determined by Use of the Grating Holographic Interferometry | |
| P. PYRZANOWSKI, J. STUPNICKI |
| The Effect of Microstructure on Fracture Toughness of Ultra-Low Carbon Bainitic Steels | |
| S.M. PYTEL, W. TOMASZEWSKA-GORECKA |
| Dynamic Correction Functions for K - a Numerical Approach | |
| A. RAGER, J.G. WILLIAMS, A. IVANKOVIC, V. TROPSA |
| The New Criteria of Metals' Bearing Ability Evaluation | |
| YU.I. RAGOZIN, YU.M. GOMZIKOVA, S.A. GOMZIKOV |
| Micromechanical Approach - Transferability of Ductile Fracture Parameters | |
| M. RAKIN, A. SEDMAK, Z. CVIJOVIC, M ZRILIC |
| Effect of Annealing on the Fracture Behavior of Polyethylene | |
| S. RAVI, M. TODO, K. ARAKAWA, K. TAKAHASHI |
| Small Specimen, Accelerated Fracture Mechanics Test Methods for Failure Analysis | |
| L. RAYMOND |
| Crack Resistance Behaviour of Pressure Die Cast Magnesium Alloys | |
| D. REGENER, G. DIETZE |
| Conditions of The "Fish Eyes" Formation in The Process of Hydrogen Induced Destruction | |
| D. RENOWICZ, M. SOZANSKA |
| Crack Growth in Three-Dimensional Structures | |
| H.A. RICHARD, M. SCHOLLMANN, M. FULLAND |
| Microstructure Characteristics Related to the High Temperature Fracture Resistance of the ESIS Silicon Nitride Reference Material | |
| G. ROEBBEN, J.-P. ERAUW, T. LUBE, R. G. DUAN, F. CAMBIER, O. VAN DER BIEST |
| Some Critical Problems of Fracture Mechanics Concerning with Life Assessment of Materials and Structures | |
| O.M. ROMANIV |
| Intersonic Decohesion Along Weak Planes: Experiments and Theory | |
| A.J. ROSAKIS, Y. HUANG |
| Similarity Scaling in 3-D Fatigue Crack Closure | |
| S. ROYCHOWDHURY, R.H. JR. DODDS |
| A New Procedure to Calibrate the Weibull Stress Modulus (m) | |
| C. RUGGIERI |
| The conditions for Void Initiation in Metal Matrix Composites | |
| I. SABIROV, D. DUSCHLBAUER, H.E. PETTERMANN, O. KOLEDNIK |
| Development of a Toughness Testing Technique, for Zircaloy Cladding, Using an Internal Conical Mandrel (ICM) | |
| C. SAINTE CATHERINE, S. CARASSOU, N. RAMASUBRAMANIAN, C. LEMAIGNAN, P. BILLOT |
| Near-Threshold Fatigue Crack Propagation in Austenitic Stainless Steels | |
| C. SARRAZIN-BAUDOUX, J. PETIT, C. AMZALLAG |
| Investigation Of The Abnormal Near- Threshold Fatigue Crack Propagation on a Ti6246 Alloy | |
| C. SARRAZIN-BAUDOUX, J. PETIT, F. MIGNOT, V. DOCQUET |
| Microstructural Short Fatigue Crack Growth - Effect of Mixed Mode Conditions and Crack Closure | |
| A. SCHICK, C.-P. FRITZEN, W. FLOER, U. KRUPP, H.-J. CHRIST |
| Fatigue of Structures and Materials in the 20th Century and the State of the Art. | |
| J. SCHIJVE J. |
| Scaling of Charpy Fracture Energy with Specimen Size | |
| H.J. SCHINDLER, P. BERTSCHINGER, S. VODENICHAROV |
| Modelling of Fatigue Crack Propagation and Brittle Fracture Problems | |
| A. SEWERYN A., A. TOMCZYK, Z. MROZ |
| Estimating 3-D SE(B) Fracture Parameters using 2-D Equations | |
| G. SHEN G., R. BOUCHARD, W.R. TYSON |
| Evaluation of Miniature Specimens for the Determination of Low Constraint Cleavage Toughness | |
| A.H. SHERRY, S. JACQUES, M.A. WILKES, G. WARDLE, P.J. BUDDEN |
| Failure of Ti Plates for Oral and Maxillo-facial Surgery | |
| A.P. SILVA, G. SPERA, C. AZEVEDO |
| Experimental and Analytical Studies on Fatigue Crack Growth and Fracture Behaviour of Carbon Steel Elbows | |
| P.K. SINGH, K.K. VAZE, H.S. KUSHWAHA, D.M. PUKAZHENDI, S. SEETHARAMAN, D.S.R. MURTHY |
| Method for Estimation of Volume Damages in Composites by Usage of Acoustic Emission Criteria | |
| V.R. SKALSKY, O.M. SERHIYENKO, O.YE. ANDREYKIV |
| Brittle Fracture of Polycrystals: a New Pseudo Three-Dimensional Model | |
| G.E. SMITH, A.G. CROCKER, P.E.J. FLEWITT, R. MOSKOVIC |
| Structural Integrity Assessment of Concrete Using a New Nondestructive Method | |
| A. SPAGNOLI A., K. MORI, Y. MURAKAMI, G. KONDO, I. TORIGOE |
| Fatigue Crack Growth in 0.15C-2Cr-Mo-V Steel After its High Temperature Hydrogen Degradation | |
| T. STAHIV, O. STUDENT, I. DZIOBA, M. GAJEWSKI |
| Modelling crack growth by level sets | |
| M. STOLARSKA, D.L. CHOPP, N. MOES, T. BELTYSCHKO |
| Fatigue Damage Mechanisms in Duplex a-y Steels | |
| J. STOLARZ |
| Damage Mechanics Application on Destroyed Steel Bridge | |
| D. SUMARAC, R. SALATIC |
| Resistance to Fracture and Fatigue Crack Growth in Ni3Al Phase Based Intermetallic Alloy | |
| L. SNIEZEK L., Z. BOJAR, P. JÓZWIK |
| Simple Calculation of Geometrical Shielding at Intergranular Crack Front by Means of Pyramidal Model | |
| P. SANDERA, J. HORNÍKOVÁ, J. POKLUDA |
| Ductile-Brittle Transition in Charpy and CT tests/Experiments and Modelling | |
| B. TANGUY, J. BESSON, R. PIQUES, A. PINEAU |
| Effect of Grain Morphology on Brittle Fracture of P/M Tungsten Fine Wires | |
| K. TANOUE |
| Microstructure Dependence of Fatigue Behaviour in Beta Ti-22V-4Al Alloy | |
| K. TOKAJI K., K. OHYA, H. KARIYA |
| Micromechanics of Fracture in Notched Samples of Heavily Drawn Steel | |
| J. TORIBIO, F.J. AYASO |
| On the Most Adequate Round Notched Specimen for Hydrogen Embrittlement Testing | |
| J. TORIBIO, F.J. AYASO |
| Micromechanics of Hydrogen-Assisted Damage in Progressively Drawn Pearlitic Steel | |
| J. TORIBIO, F.J. AYASO, E. OVEJERO |
| Evaluation of Fatigue Crack Closure from Local Compliance Measurements in Structural Steel | |
| M. TOYOSADA, M. SKORUPA, T. NIWA, T. MACHNIEWICZ, K. MURAKAMI, A. SKORUPA |
| Notch Effect in Brittle-Ductile Transition Behaviour | |
| L. TOTH |
| Some Remarks on Low Cycle Fatigue Testing and Evaluation Procedures | |
| L. TOTH, P. ROZSAHEGYI |
| The Influence of Embrittling Additives and Residual Stresses on Fatigue Crack Growth Rate in Welded Titanium Joints | |
| V.T. TROSHCHENKO, V.V. POKROVSKY, V.L. YARUSEVICH |
| Model for Describing Fatigue Crack Growth Rate Considering Changes in the Threshold SIF | |
| G.V. TSYBAN'OV |
| Numerical Modelling in Nonlinear Fracture Mechanics | |
| V. TVERGAARD |
| X-Ray Dynamical Defectoscopy: A Way to study Damage Processes | |
| D. VAVRIK, J. JAKUBEK, J. VISSCHERS, S. POSPISIL, J. ZEMANKOVA |
| Energy absorption in glass-polycarbonate laminates | |
| F.A. VEER, A.C. RIEMSLAG, C. VAN KRANENBURG |