General Papers
| Failure Mechanisms of Composite Sandwich Beams under Impact Loading | |
| J.L. ABOT, I.M. DANIEL, E.E. GDOUTOS |
| Application of the Master Curve Approach for Dynamically Loaded Pressure Vessel Steels | |
| J. BOEHMERT, H.-W. VIEHRIG, A. GOKHMAN |
| Fracture of New Joints of Aero Structures | |
| M.A. DEBSKI, K.M. GOLOS, D.K. DEBSKI |
| The Effect of Strain Rate on Steel Wires Failure During Cold Drawing | |
| F. GÁLVEZ F., J.M. ATIENZA, J. RUIZ, M. ELICES |
| Fatigue of Materials under Cyclic Loading with Participation of the Mean Load | |
| G. GASIAK G., R. PAWLICZEK |
| Description of Fatigue Crack Rate with the Use of AJ Integral Range for Notched Specimens under Tension and Bending | |
| G. GASIAK, D. ROZUMEK, R. PAWLICZEK |
| Stiffness Changes in Fiber-Reinforced Polymeric Matrix Laminates Caused by Intralaminar Damage | |
| J. GERMAN |
| Modeling of Deformation and Fracture Processes under the Thermomechanical Action | |
| R.V GOLDSTEIN, I.V. KADOCHNIKOV, YU.V. ZHITNIKOV |
| Dwell Time Effects on Fatigue Life and Damage Mechanisms | |
| T. GOSWAMI, J. KROHN, H. HANNINEN |
| Initiation and Growth Behaviour of Smooth Specimens Cut from the Squeeze Cast Al Alloy Car Wheels | |
| M. GOTO, T. YAMAMOTO, H. NISITANI, N. KAWAGOISHI |
| Requirements on the Specimen Geometry to Determine Intrinsic Fracture Mechanics Values of Polymer Materials | |
| W. GRELLMANN, R. LACH, S. SEIDLER |
| The SIF Calculation of Internal Cracks under Rolling Contact Loads by a Weight Function Approach | |
| M. GUAGLIANO, L. VERGANI |
| Constraint Effect on Fracture Behaviour on Strength Mis-matched Weld Joints | |
| N. GUBELJAK, I. SCHEIDER, M. KOQAK, M. OBLAK, J. PREDAN |
| Guideline on Fracture Mechanics Proof of Strength for Engineering Components | |
| L. HODULAK, J.G. BLAUEL, C. BERGER, B. PYTTEL, C.P. GERDES |
| Local and Global Approaches to Giga Cycles Fatigue Threshold | |
| Y. KATZ, Y. MURAKAMI, W.W. GERBERICH |
| Influence of Pre-Strain on Fatigue Strength of Squeeze Cast Al-Alloy | |
| N. KAWAGOISHI, H. NISITANI, M. GOTO |
| Time-Changeable Fracture Mechanics Parameters for Polymers under Impact Loading | |
| R. LACH, S. SEIDLER, S. SEIDLER, W. GRELLMANN, W. GRELLMANN |
| Investigation of the Brittle Failure Properties of an A42 Pipeline Steel Butt Weld: Comparison of the Base Metal, Simulated HAZ and Weld Metal | |
| L. LAM THANH, R. PIQUES, A.F. GOURGUES, R. BATISSE, P. WIDENT |
| Controlled Crack Growth with a Dual-Tip Indenter | |
| A. MARTÍN-MEIZOSO, J. GIL-SEVILLANO, J.M. MARTÍNEZ-ESNAOLA, M. FUENTES |
| Creep and Creep-Fatigue Crack Behaviour of 1Cr- and Modified 10Cr-steels in Air and Inert Gas | |
| F. MUELLER, A. SCHOLZ, J. GRANACHER, G. SCHELLENBERG, W. STADTMUELLER, A. KLENK |
| The New Criteria of Metals' Bearing Ability Evaluation | |
| YU.I. RAGOZIN, YU.M. GOMZIKOVA, S.A. GOMZIKOV |
| Fatigue Crack Growth in 0.15C-2Cr-Mo-V Steel After its High Temperature Hydrogen Degradation | |
| T. STAHIV, O. STUDENT, I. DZIOBA, M. GAJEWSKI |