General Papers
| Effects of microstructure on very-high-cycle fatigue crack initiation and life scatter for a high strength steel | |
| Zhengqiang Lei, Youshi Hong, Jijia Xie |
| The eXtended Finited Element Method for frictional contact problem | |
| Zhiqiang Hu, Guogang Fan, Gao Lin |
| Thermal shock residual strength of ultra-high temperature ceramics with the consideration of temperature | |
| Dingyu Li, Weiguo Li, Ruzhuan Wang |
| UHPC precast product under severe freeze-thaw conditions | |
| Ming-Gin Lee, Kun-Long Lee, Mang Tia |
| Integrity increasing of damaged steel pipelines using external and internal reinforcing | |
| Janos Lukacs, Gyula Nagy, Imre Torok |
| Effect of SiC partilces on fatigue crack propagation of spray-formed SiC particulate-reinforced Al–Si alloy composites | |
| Wei Li, Jian Chen, Jianjun He |
| Atomistic simulation of fatigue crack growth in α-Fe under high temperature | |
| Tong Liu, Minshan Liu |
| Null-field integral approach for the piezoelectricity problems with arbitrary elliptical inhomogeneities | |
| Ying-Te Lee, Jeng-Tzong Chen, Shyh-Rong Kuo |
| Integrated Damage Mechanics Approach to Brittle and Ductile Crack Propagation | |
| Geralf Hütter, Thomas Linse, Uwe Mühlich |
| Application of damage models to the ductile-brittle transition region of Reactor steels | |
| Thomas Linse, Meinhard Kuna |
| Local Approach Applied to the Fracture Toughness of Resistance Spot Welds | |
| Florent Krajcarz, Anne-Françoise Gourgues-Lorenzon, Emmanuel Lucas |
| Finite Element Simulation of Crack Propagation for α-Ti Based on Cohesive Zone Law Deriving from Molecular Dynamics | |
| Yi Liao, Xiangguo Zeng, Jun Chen |
| Mesh Dependence of Transverse Cracking in Laminated Stainless Steel with both High Strength and High Ductility | |
| Xian Guo, Wenjun Zhang, Jian Lu |
| Crack Growth Life Assessment on Turbine Component under Combined Fatigue Loading | |
| Dianyin Hu, Rongiqao Wang, Huawei Liu |
| Effect of welding defects on plastic behaviour and fatigue lifetime of friction stir welded Al-Cu-Li alloy | |
| Thomas Le Jolu, Thilo F. Morgeneyer, Anne Denquin |
| Short/Small Crack Model Development for Aircraft Structural Life Assessment | |
| Min Liao, Guillaume Renaud, Yan Bombardier |
| Experimental Studies of Thermal Aging Effects on the Tensile and Tearing Fracture Behavior of Carbon Black Filled Rubbers | |
| Xiaoling Hu, Yan Li, Xiu Liu |
| Buckling Analysis of a Nanowire Lying on Winkler-Pasternak Elastic Foundation | |
| Tiankai Zhao, Jun Luo |
| Effect of thermally activated energy on dislocation emission from a blunted crack tip | |
| X. Zeng, Q.H. Fang, Y.W. Liu |
| Effect of cooperative grain boundary sliding and migration on emission of dislocations from a crack tip in nanocrystalline materials | |
| H. Feng, Q.H. Fang, Y.W. Liu |
| Edge dislocation emission from nanovoid with the effect of neighboring nanovoids and surface stress | |
| Yingxin Zhao, Qihong Fang, Youwen Liu |
| Edge dislocation emission from nanovoid with the effect of neighboring nanovoids and surface stress | |
| Yingxin Zhao, Qihong Fang, Youwen Liu |
| The Crack Growth Behavior in electrolyte membrane under Mechanical-electrochemical Loading | |
| Yun J Chen, Yi Sun, Yi Z Liu |
| Finite element analysis of erosive wear for offshore structure | |
| Z.G. Liu, S. Wan, V.B. Nguyen |
| Random elasto-plastic lattice modeling of damage in fibrous materials | |
| Keqiang Hu, Zengtao Chen, K. C. Li |
| Computational prediction of fracture toughness of polycrystalline metals | |
| Yan Li, David L. McDowell, Min Zhou |
| Residual stress effects on the propagation of fatigue cracks in the weld of a CA6NM stainless steel | |
| Alexandre Trudel, Myriam Brochu, Martin Lévesque |
| A New Interface Element for Shell Structures Delamination Analysis | |
| Biao Li, Yazhi Li, Jie Su |
| Time-Domain BEM for Dynamic Crack Problems in Thin Piezoelectric Structures | |
| Hongjun Zhong, Jun Lei, Chuanzeng Zhang |
| Investigation on 3D fatigue crack propagation in surface-cracked specimens | |
| X. Li, H. Yuan, J.Y. Sun |
| Stability and fracture analysis of arch dam based on deformation reinforcement theory | |
| Yuanwei Pan, Yaoru Liu, Qiang Yang |
| ACOUSTIC EMISSION DETECTION IN CONCRETE SPECIMENS: EXPERIMENTAL ANALYSIS AND SIMULATIONS BY A LATTICE MODEL | |
| I. Iturrioz, G. Lacidogna, A. Carpinteri |
| Particle simulation of AE statistics and fracture in concrete TPB test | |
| Alberto Carpinteri, Giuseppe Lacidogna, Stefano Invernizzi |
| Numerical Modeling on the Stress-Strain Response and Fracture of Modeled Recycled Aggregate Concrete | |
| Wengui Li, Jianzhuang Xiao, David J. Corr |
| Determination of Residual Fracture Toughness of Post-fire Concrete Using Analytical and Weight Function Method | |
| Kequan YU, Zhoudao LU, jiangtao YU |
| The influence of sea water corrosion on the resistance cracking performance of carbon steel | |
| Wang Limin, Han Daoping, Zhang Donghuan |
| Recent developments in brittle and quasi-brittle failure assessment of graphite by means of SED approach | |
| Filippo Berto, Paolo Lazzarin, M.R. Ayatollahi |
| Stress state dependent failure loci of a talc-filled polypropylene material under static loading and dynamic loading | |
| Shaoting Lin, Yong Xia, Chin-Hsu Lin |
| Examination on a Criterion for a Debonding Fracture of Single Lap Joints from the Intensity of Singular Stress Field | |
| Tatsujiro Miyazaki, Nao-Aki Noda, Rong Li |
| Advanced Assessment of Ductile Tearing in Nuclear Reactor Pressure Vessel Steel Using X-ray Tomography | |
| Michael Daly, Fabien Leonard, John K Sharples |
| Fracture Behavior in Timber Element Under Climatic Variations | |
| Frédéric Lamy, Frédéric Dubois, Octavian Pop |
| Fatigue and dwell-fatigue behavior of nano-silver sintered lap-shear joint at elevated temperature | |
| Yansong Tan, Xin Li, Chengjun Li |
| The tensile properties of NiCrMo1 steel under conditions of hydrogen charging studied using the linearly increasing stress test | |
| Qian Liu, Bartolomeus Irwanto, Andrej Atrens |
| CMOD-Based J Integral Measurement for Surface Cracked Specimens | |
| Xudong Qian, Ya Li |
| Acoustic Emission Technique (AET) for Failure Analysis in wood materials | |
| Frédéric LAMY, Mokhfi TAKARLI, Frédéric DUBOIS |
| Analysis of Metallic Ductile Fracture by extended Gurson models | |
| Wei Jiang, Yazhi Li, Yixiu Shu |
| A experimental study of I-II-III mixed mode crack fracture of rock under different temperature | |
| Li-yun LI, Zhi-qiang XU, Ming-xiu LI |
| Numerical study of the deformations of two coplanar circular cracks during their coalescence | |
| L. Legrand, V. Lazarus |
| Failure Analysis Procedure of Steel Wire Drawing Fracture | |
| Lihua LIU, Jie SUN, Huan WANG |
| Transition of ductile and brittle fracture during DWTT by FEM | |
| YouYou WU, Hailiang YU, Cheng LU |
| Ductile to brittle transition concept on fracture behavior of poly(vinylidene fluoride) / poly(methyl methacrylate) blend | |
| Lucien Laiarinandrasana, Yannick Nziakou, Jean-Louis Halary |
| Fracture of Metallic Ring Samples under static and dynamic loading | |
| Viktor A. Morozov, Yuriy V. Petrov, Anton A. Lukin |
| Evaluation of ductile fracture models in high velocity impact problems | |
| Ying Li, Xiaobin Li, Xiangshao Kong |
| Effect of corrosion pits on fatigue life and crack initiation | |
| Xin-Yan Zhang, Shu-Xin Li, Rui Liang |
| Dissipated Energy Measurements of Metal Material during High-cycle Fatigue Test Process | |
| Yuan LI, Francois MAQUIN, Zhicheng LIU |
| Measurement of Effective Stress Intensity Factor Range of Mode II Fatigue Crack Growth using Hysteresis Loop | |
| Shigeru Hamada, Minjian Liu |
| Experimental Investigation of Mode I Fatigue Crack Growth Behavior of Titanium Foils | |
| Lee Chang-Woo, Liu Liu, W John Holmes |
| Determination of statistical secured residual lifetime based on sensitivity analysis and stochastic crack propagation simulation | |
| Jens Lebahn, Manuela Sander |
| Residual stress effects on the propagation of fatigue cracks in the weld of a CA6NM stainless steel | |
| Alexandre Trudel, Myriam Brochu, Martin Lévesque |
| Crack growth rate in friction stir welded nugget under different R ratio fatigue load | |
| Yu E Ma, BaoQi Liu, ZhenQiang Zhao |
| Fatigue Behavior Investigation and Micro-Analysis of X80 High-Strain Linepipe | |
| Yang Li, Weiwei Zhang, He Li |
| Research on Fatigue Damage and Crack Propagation of GH4133B Superalloy Used in Turbine Disk of Aero-engine | |
| Rongguo Zhao, Dunhou Tan, Xiyan Luo |
| FATIGUE CRACK GROWTH SIMULATION OF SURFACE CRACKS UNDER ARBITRARY CRACK FACE LOADING | |
| Xiaobin Lin |
| Characterization of the fatigue behavior of brazed steel joints by digital image correlation (DIC) | |
| Michael Koster, Christoph Kenel, Christian Leinenbach |
| Study on Delamination Behavior and Crack Opening Contour of Advanced Hybrid Laminates during Fatigue Crack Propagation Process | |
| Xiao Huang, Jianzhong Liu |
| Subcycle fatigue crack growth mechanism investigation for aluminum alloys and steels | |
| Jian Yang, Wei Zhang, YongMing Liu |
| Effect of different micro-arc oxidation coating layer types on fatigue life of 2024-T4 alloy | |
| Xi-Shu Wang, Xing-Wu Guo, Xu-Dong Li |
| Determination of fatigue crack propagation limit curves for high strength steels, and their applicability for structural elements having crack like defects | |
| János Lukács |
| Elastodynamic analysis of a finite crack at an arbitrary angle in the functionally graded material under in-plane impact loading | |
| Sheng-Hu Ding, Xing Li |
| The thermal effect of anti-plane crack in a functionally graded piezoelectric strip under electric shock | |
| Xing Li, Yongyi Long, Pengpeng Shi |
| Accuracy of Acoustic Emission Localization for Masonry Structures Monitoring | |
| Jie Xu, Giuseppe Lacidogna, Alberto Carpinteri |
| Correlation between Acoustic Emission and Seismicity in the Sacred Mountain of Varallo Renaissance Complex in Ital | |
| Alberto Carpinteri, Giuseppe Lacidogna |
| Quantitative analysis of microcracks ensemble induced by shock-wave loading of metallic targets (vanadium and iron). | |
| Elena Lyapunova, Oleg Naimark |
| Mode I Fracture Toughness of Nanorubber Modified Epoxy under Wide loading Rate | |
| Ying-Gang Miao, Hong-Yuan Liu |
| Analyses of dynamic response and sound radiation of sandwich plate subjected to acoustic excitation under thermal environment | |
| Yuan Liu, Yueming Li |
| Characterization of Mechanical and Physical Properties of Silica Aerogels Using Molecular Dynamics Simulation | |
| Jingjie Yeo, Jincheng Lei |
| Mechanical properties of natural fiber polyester composite sandwich panels | |
| Jie Lu, Bing Yang |
| Effect of Post-Weld Heat Treatment on the Fatigue Properties of Dissimilar Titanium Alloy Joints | |
| S.Q. Wang, J.H. Liu |
| Tensile Deformation Behavior of a Nickel-base Superalloy under Dynamic Loads | |
| Lei Wang, Yang Liu |
| Electrical Breakdown of a Metallic Nanowire Mesh | |
| Yuan Li, Kaoru Tsuchiya |
| Micromechanical modeling and numerical simulation of ablation of 3D C/C composites | |
| Na Liu, Qingsheng Yang |
| Coupled fracture mode associated with anti-plane loading of cracks and notches | |
| Filippo Berto, Paolo Lazzarin |
| Simulation of fracture and fatigue damage in stainless steel 304 using a cohesive zone model | |
| Huan Li, Huang Yuan |
| J-integral Calculation of Nonlinear Fracture for Colloidal Soft Material | |
| Hongyan Wang, Jun Lei |
| Interaction between an Annular Crack and the Imperfect Interface in Magnetoelectroelastic Layers | |
| Yansong Li, Longjiang Bian |
| Local approach of fracture on semi-crystalline polymers: contribution of X-ray laminography technique | |
| Lucien Laiarinandrasana, Thilo F. Morgeneyer |
| Micro-scale Testing to Evaluate the Fracture Characteristics of Quasi-brittle Materials | |
| Dong Liu, Peter Heard |
| Evaluation on the Factors Influencing Thermal-stress-induced Growth of Sn Nanowires | |
| Yuan Li, Kentaro Miura |
| Improvement of interlaminar mechanical properties of CARALL based on nanofiller interface reinforcement and other fabrication techniques | |
| Huiming Ning, Yuan Li |
| Cap Effect on Pull-out Behavior of CNT in CNT-reinforced Nanocomposites | |
| Ning Hu, Yuan Li |
| Some Statistical Parameters of Acoustic Emission Signals in Porous Iron under Static Loading | |
| Andrey A. Lependin, Victor V. Polyakov |
| Models for Microcracks Extension and Damage Evolution Based on Acoustic Emissions | |
| Wang Li, Yuanchun Ye Jinsheng MAO |
| An Efficient A-FEM for Arbitrary Cracking in Solids | |
| Qingda Yang, Wei Liu |
| Analysis of resistance cracking process on the experiment of meso and macroscopic of quasi-brittle materials | |
| Wang Limin, Xu Shilang |
| Fracture of anisotropic materials with plastic strain-gradient effects | |
| Brian Nyvang Legarth |
| Cracks formation in the vertical co-depositing colloidal crystal | |
| Ding Lan, Yuren Wang |
| The elastic-plastic limit pressure of cylinder under internal pressure using a new yield criterion | |
| Xiaoyu Liu, Zheng Yang |
| Time dependent ratcheting-fatigue interactions of tempered 42CrMo steel: Experiments and constitutive model | |
| Juan Zhang, Haibo Luo |
| A mechanism-based plastic model to simulate the mechanical properties in nanostructured bimodal metals | |
| LinLi Zhu, Jian Lu |
| Effect of Nanoparticle Modification on Composite Mode II Delamination | |
| Ying Zeng, Hong-Yuan Liu |
| A Software Tool for the Fatigue Growth Analysis of Multiple 3D Cracks from Fastener Holes | |
| Yixiu Shu, Yazhi Li |
| Determination of Residual Stresses in Structural Elements Using Electron Speckle Interferometry Method | |
| Leonid Lobanov, Vyacheslav Pivtorak |
| Revisit on the fractal dimension in damage and fracture | |
| Chunsheng Lu |
| Effect of Stress Singularities on Scaling of Quasibrittle Fracture | |
| Jia-Liang Le, Mathieu Piechout |
| Electroelastic analysis of four mode-III cracks originating from a circular hole in piezoelectric materials | |
| JunHong Guo, ZiXing Lu |
| Evaluation of Strength Statistics of Quasibrittle Structures Based on Mean Size Effect Analysis | |
| Jia-Liang Le, Augusto Cannone Falchetto |
| Propagation of tensile planar cracks in highly heterogeneous media: A numerical study | |
| M. Vasoya, V. Lazarus |
| Study on CTOD and microstructure in flash welded joints for 630-730 MPa grade mooring chains | |
| Shuwei Leng, Zhangmu Miao |
| Interfacial mechanics of fiber push-out test: nano-indention technique and cohesive element modeling | |
| Xi Li, Qingsheng Yang |
| Interfacial Delamination of SMA Reinforced Composite under Low Velocity Impact | |
| Jun Luo, Dongjie Liang |
| Experimental study of the influence of thermal shock on mechanical properties of ceramic coating systems | |
| Xiaona Li, Lihong Liang |
| Asymptotic solutions for buckling delamination induced crack propagation in the thin film- compliant substrate system | |
| Tongqing Lu, T. J. Wang |
| A Simplified Approach for the Evaluation of Nearly singular integrals in Boundary Element Method | |
| Yu Miao, Jiahe Lv |
| Crack and defect formation in diamond films | |
| Duosheng Li, Qing H. Qin |
| Mechanical Properties and Fracture Behavior of Poly(vinylidene fluoride)-Polyhedral Oligomeric Silsesquioxane Nanocomposites by Nanotensile Testing | |
| Fanlin Zeng, Yizhi Liu |
| STUDY OF THE CREEP DAMAGE PROPERTIES OF ASPHALT MIXTURE UNDER STATIC LOAD | |
| Zhou Zhigang, Feng Lin |